Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 124

Debug Console Window
88
Word Conditional
•
Equation
File Menu
Open
•
Save
•
Save As
•
Exit
•
Edit Menu
line Insert
•
line Delete
•
line Copy
•
Insert copied lines Insert the data on the clipboard to the currently speci-
•
Help Menu
Help Contents
•
Help Index
•
About
•
Set the Word Conditional Equation to be inserted to the
Conditional Equation/Output Equation.
Value Selection Select which is the value of
•
Conditional Equation, fixed (up-
per) or I/O memory (lower).
Type Select the I/O memory type.
•
Address Input the address of I/O memory
•
type.
Operator Select =,<>,<=,>=,<,>, or NOT
•
as an operator from the drop
down list. Selecting NOT will not
reflect the value to the Condi-
tional Equation/Output Equation.
Value For "Fixed Value", input BCD(0
•
to 9999) or BIN(0x0 to 0xFFFF).
For "I/O memory", set the type
and the address.
Read the I/O Condition file from the File dialog. If some
settings are already input in the window, the current
input data will be discarded.
If the file already opened by Open in the File menu
exists, save the current data to the existing open file. If
a file is not open, this selection is not possible.
Save the present setting data in the File Save dialog
box.
Close the Setting window. (Different from Exit of a tool)
Insert specified number of lines just before the line
currently selected.
Delete the specified lines
Copy the specified lines to the clipboard. The data on
the clipboard can be used in the commercial spread
sheet software.
fied line. The line data is evaluated when inserting.
Display Help Contents for Windows.
Display Help Index for Windows.
Display the version information.
Section 3-9