Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 253

I/O Memory Allocation
Address
Words Bits
A360 to A36001 Executed
A391 to FAL Number
A39115 Flags
A385 A38506 File Deleted
Flags
A38507
A392 A39204 RS-232C
Port Error
Flag
A39205 RS-232C
Port Send
Ready Flag
(No-protocol
mode)
A39206 RS-232C
Port Recep-
tion Com-
pleted Flag
(No-protocol
mode)
A39207 RS-232C
Port Recep-
tion Overflow
Flag
(No-protocol
mode)
Name
The flag corresponding to the
specified FAL number will be
turned ON when FAL(006) is
executed. Bits A36001 to
A39115 correspond to FAL
numbers 001 to 511.
The flag will be turned OFF
when the error is cleared.
The system deleted the re-
mainder of an EM file memory
file that was being updated
when a power interruption oc-
curred.
The system deleted the re-
mainder of a Memory Card file
that was being updated when a
power interruption occurred.
ON when an error has occurred
at the RS-232C port. (Not valid
in peripheral bus mode or NT
Link mode.)
ON when the RS-232C port is
able to send data in no-protocol
mode.
ON when the RS-232C port has
completed the reception in
no-protocol mode.
When the number of bytes
•
was specified: ON when the
specified number of bytes is
received.
When the end code was
•
specified: ON when the end
code is received or 256 bytes
are received.
ON when a data overflow oc-
curred during reception through
the RS-232C port in no-protocol
mode.
When the number of bytes
•
was specified: ON when more
data is received after the recep-
tion was completed but before
RXD(235) was executed.
When the end code was
•
specified: ON when more data is
received after the end code was
received but before RXD(235)
was executed. ON when 257
bytes are received before the
end code.
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
1: That FAL Same as
was exe- CS/CJ-series
cuted PLC.
0: That FAL
wasn't exe-
cuted
1: File de- Not used.
leted
0: No files
deleted
1: File de- Not used.
leted
0: No files
deleted
1: Error Same as
0: No error CS/CJ-series
PLC.
1: Same as
Able-to- CS/CJ-series
send PLC.
0: Un-
able-to-
send
1: Recep- Same as
tion com- CS/CJ-series
pleted PLC.
0: Recep-
tion not
completed
1: Overflow Same as
0: No over- CS/CJ-series
flow PLC.
Section 9-3
Settings
217