I/O Condition Tool - Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual

Error Processing

10-1-3 I/O Condition Tool

Symptoms
Communication error (received
an error response).
Communications error (commu-
nications timeout).
Failed to get the current IOM.
File format is invalid.
I/O Condition file exceeds the
limit of maximum lines.
I/O Condition file exceeds the
limit of maximum lines. The
maximum limit is -- lines
I/O Condition to watch does not
exist.
The data in the clipboard is not
the I/O condition format. Invalid
lines have been deleted.
The lines with invalid I/O condi-
tion format have been deleted.
242
If an error occurs while operating the I/O Condition Tool, the error contents will
be displayed in the dialog box. Remove the error causes referring to the
remedies.
Causes
Wrong address
specification or
range of I/O
memory for I/O
conditions or
wrong communi-
cations environ-
ment.
A timeout oc-
curred in a re-
sponse from the
Ladder Engine.
Wrong address
specification or
range of I/O
memory for I/O
conditions.
The specified
execution file has
an invalid format.
Wrong format for
I/O conditions.
1. Check the I/O conditions settings.
2. Exit executing application programs excluding the
CX-Simulator and try again.
1. If the cycle time of the Ladder Engine is too long,
use synchronous processing in the virtual cycle
time.
2. Check if the target FINS address is the same as
that of the Ladder Engine.
Check the I/O conditions settings.
Specify the I/O condition file, which has a different file
format from a Data Replay file.
Change the registered conditions or create another
execution file.
Change the registered conditions or create another
execution file.
Check the I/O conditions settings and if "D2" is set in
the execution column.
Copy the I/O condition expression of correct format to
the clipboard and try again.
Check the I/O conditions settings.
Section 10-1
Remedies