Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 257

I/O Memory Allocation
Address
Words Bits
A401 A40115 Memory
Error Flag
(Fatal error)
Name
ON when an error occurred in
memory or there was an error in
automatic transfer from the
Memory Card when the power
was turned ON.
CPU Unit operation will stop and
the ERR/ALM indicator on the
front of the CPU Unit will light.
The location where the error
occurred is indicated in A40300
to A40308, and A40309 will be
turned ON if there was an error
during automatic transfer at
start-up.
This flag will be turned OFF when
the error is cleared. (The auto-
matic transfer at start-up error
cannot be cleared without turning
off the PLC.)
CS/CJ-series PLC
Function
CX-Simulator
Settings Function
1: Error Same as
0: No error CS/CJ-series
PLC.
Section 9-3
Settings
221