Omron WS02-SIMC1-E - V1.9 REV 02-2009 Operation Manual page 128

Debug Console Window
[Command log] | [View Log]
92
FINS Address Filters
Registration List
•
Filter Check
•
Add
•
Delete
•
Network address
•
Node address
•
Machine address
•
Name
•
FINS Command Filters
The Registration
•
List
Filter Check
•
Add
•
Delete
•
Command name
•
Note Refer to 8-3 Generating Virtual External Inputs for the details of the Command
Log setting.
Display the contents of the saved Command Log. Display the content of the file
set as the log file in the Command log Setting with the Memo Pad (OS stan-
dard).
Display the FINS address selectable as the FINS ad-
dress filter. The [All local nodes] shows all FINS ad-
dresses in the computer. Usually specify the [All local
nodes] as the filter (registered as the initial value and
can not be deleted).
Check here if selecting items in the Registration List.
Add the FINS address to the Registration List.
Delete the selected items in the Registration List.
Specify the FINS network address to be added to the
Registration List. Specifying "*" will target all of the
network addresses.
Specify the FINS node address to be added to the
Registration List. Specifying "*" will target all of the
node addresses.
Specify the FINS node address to be added to the
Registration List. Specifying "*" will target all of the
machine numbers.
Specify the name of the FINS address to be added to
the Registration List.
Display the filter of the FINS commands selectable as
the FINS command filter. When selecting, compare
from top of the FINS commands and save the matched
commands as the log.
Check here if selecting the item in the Registration List.
Add the filter of the FINS command to the Registration
List.
Delete the selected items in the Registration List.
Display the list of FINS command filters registered in
advance.
Section 3-9