Specifications; General Specifications - Omron NE1A-SCPU01 - 07-2009 Operation Manual

Specifications

2-2 Specifications
2-2-1

General Specifications

NE1A-SCPU01(-V1)(-EIP)
DeviceNet supply voltage
Device supply voltage V0 (See note.)
I/O supply voltages V1 and V2
(See note.)
Current con-
sumption
Overvoltage category
EMC
Vibration resistance
Shock resistance
Mounting
Operating temperature
Humidity
Storage temperature
Degree of protection
Serial interface
Weight
Note
NE1A-SCPU02(-EIP)
DeviceNet supply voltage
Device supply voltage V0 (See note.)
I/O supply voltages V1 and V2
(See note.)
Current con-
sumption
Overvoltage category
EMC
Vibration resistance
Shock resistance
Mounting
Operating temperature
Humidity
Storage temperature
Degree of protection
Serial interface
Weight
Note
34
This section provides the NE1A-series Controller's specifications.
Item
11 to 25 VDC (Supplied from communications connector.)
20.4 to 26.4 VDC (24 VDC, −15% to 10%)
20.4 to 26.4 VDC (24 VDC, −15% to 10%)
DeviceNet 15 mA at 24 VDC
Internal logic circuits 230 mA at 24 VDC (NE1A-SCPU01-EIP: 280 mA)
II (according to IEC 61131-2: 4.4.2)
Compliant with IEC 61131-2.
0.35 mm at 10 to 57 Hz, 50 m/s
150 m/s
DIN Track (TH35-7.5/TH35-15 according to IEC 60715)
−10 to 55°C
10% to 95% (with no condensation)
−40 to 70°C
IP20
USB Ver. 1.1
460 g max. (NE1A-SCPU01-EIP: 570 g max.)
V0 to G0: For internal logic circuits, V1 to G1: For external input devices and
test outputs, V2 to G2: For external output devices.
Item
11 to 25 VDC (Supplied from communications connector.)
20.4 to 26.4 VDC (24 VDC,−15% to 10%)
20.4 to 26.4 VDC (24 VDC, −15% to 10%)
DeviceNet 15 mA at 24 VDC
Internal logic circuits 280 mA at 24 VDC (NE1A-SCPU02-EIP: 330 mA)
II (according to IEC 61131-2: 4.4.2)
Compliant with IEC 61131-2.
0.35 mm at 10 to 57 Hz, 50 m/s
150 m/s
DIN Track (TH35-7.5/TH35-15 according to IEC 60715)
−10 to 55°C
10% to 95% (with no condensation)
−40 to 70°C
IP20
USB Ver. 1.1
690 g max. (NE1A-SCPU02-EIP: 800 g max.)
V0 to G0: For internal logic circuits, V1 to G: For external input devices and
test outputs, V2 to G: For external output devices.
G or V1 and G of V2 are connected internally.
Specifications
2
at 57 to 150 Hz
2
for 11 ms
Specifications
2
at 57 to 150 Hz
2
for 11 ms
Section 2-2