Multi Connector Unit Ver. 1.0 Or Later - Omron NE1A-SCPU01 - 07-2009 Operation Manual

Command Reference: Function Blocks
8-5-16 Multi Connector
Diagram
General Description
200
2. Manual Reset
Decrementing counter:
Input
Counter
(set value)
Count
0
Output
Enable
Idle to RUN
Decrementing counter:
Input
Counter
(set value)
Count
0
Output
Enable
Idle to RUN
Unit Ver. 1.0 or Later
Input1
Output1
Default
This function can be used with Controllers with unit version 1.0 or later
(including Controllers that support EtherNet/IP).
The Multi Connector function outputs input signals (up to 8 inputs) to output
signals (up to 8 outputs).
The input signals and output signals are associated one-to-one from number
1 to 8. The status of other input signals has no effect.
Maximum Number of outputs
Section 8-5