Omron NE1A-SCPU01 - 07-2009 Operation Manual page 156

Common Functions
Monitoring the Total ON Time from the Network Configurator
122
Any of the following methods can be used to monitor the total ON time in the
local input status, test output status, or local output status.
1. Select the device and select Device – Maintenance information from the
menu bar.
2. Select the device and click the toolbar's Maintenance Button.
3. Select the device, right-click that device, and select Maintenance infor-
mation from the popup menu.
4. Select the device, select Device – Monitor from the menu bar, and click
the Maintenance Tab in the displayed window.
5. Select the device, click the toolbar's Device Monitor Button, and click the
Maintenance Tab in the displayed window.
6. Select the device, right-click that device, select Monitor from the popup
menu, and click the Maintenance Tab in the displayed window.
Each I/O point's accumulated total ON time can be cleared. To clear the time,
select the total ON time to be cleared and click the Clear Value Button.
Section 7-1