Regulations And Standards; Unit Versions Of Ne1A-Series Controllers - Omron NE1A-SCPU01 - 07-2009 Operation Manual

Regulations and Standards

6 Regulations and Standards
7

Unit Versions of NE1A-series Controllers

Checking the Unit Version
Checking the Unit Version on the Product Nameplate
The following certifications have been obtained for the NE1A-SCPU01, NE1A-
SCPU01-V1, NE1A-SCPU02, NE1A-SCPU01-EIP, and NE1A-SCPU02-EIP.
Certifying organization
TÜV Rheinland
UL
A "unit version" has been introduced to manage NE1A-series Safety Network
Controllers according to differences in functionality accompanying Unit
upgrades even though the model numbers are the same. The unit version can
be checked on the product itself or using the Network Configurator.
Note The Network Configurator maintains a revision number to manage device
functions for DeviceNet and EtherNet/IP. Refer to Checking the Unit Version
with the Network Configurator on page xxiv for the relationship between
NE1A-series Controller unit versions and the revisions.
The unit version (Ver. @.@) is listed near the lot number on the nameplate of
the products for which unit versions are being managed, as shown below.
• Unit versions for the NE1A-SCPU01 and NE1A-SCPU02 start at unit ver-
sion 1.0.
• Controllers that do not have a unit version listed on the label are called
Pre-Ver. 1.0 Controllers.
• Unit versions for the NE1A-SCPU01-EIP and NE1A-SCPU02-EIP start at
unit version 1.0.
IEC 61508 part 1-7/12.98-05.00,
EN ISO 13849-1:2006
EN 954-1:1996 (ISO 13849-1:1999)
EN ISO 13849-2:2003,
IEC 61131-2:2007,
EN 60204-1:2006,
EN 61000-6-2:2005, EN 61000-6-4:2007,
EN ISO 13850: 2006 (EN 418:1992)
NFPA 79-2007,
ANSI RIA 15.06-1999, ANSI B11.19-2003
UL 1998, UL 508, UL 1604, NFPA 79, IEC 61508,
CSA 22.2 No. 142, CSA 22.2 No. 213
Standards
6
xxiii