Omron NE1A-SCPU01 - 07-2009 Operation Manual page 31

Unit Versions of NE1A-series Controllers
IMPORTANT
NE1A-series Controller Upgrade Procedure
Device type before
change
Unit Ver. 1.0
NE1A-SCPU01 OK
Pre-Ver. 1.0
NE1A-SCPU01-V1 ---
Unit Ver. 1.0
NE1A-SCPU02 Not possible
Unit Ver. 1.0
NE1A-SCPU01-V1 Not possible
Unit Ver. 2.0
NE1A-SCPU02 Not possible
Unit Ver. 2.0
NE1A-SCPU01-EIP Not possible
Unit Ver. 1.0
NE1A-SCPU02-EIP Not possible
Unit Ver. 1.0
The Configuration data created with unit version 1.0 can be downloaded to a
NE1A-series Controller with unit version 2.0. The data will be subsequently
treated as unit version 2.0 data if it is uploaded.
Functions are added and functionality is expanded in various ways for the
NE1A-series Controllers. The device type in an existing network configuration
file can be changed to a higher version so that the new functionality can be
used.
The following table shows the NE1A-series Control device types in network
configuration files and the device types that they can be upgraded to.
NE1A-SCPU01-V1
Unit Ver. 2.0
OK
OK
Not possible
---
Not possible
Not possible
Not possible
1. Reading Configuration Data
Use the following procedure to read the configuration data with the Network
Configurator.
• Read the saved configuration data.
• Use network uploading to read configuration data from devices on the
network.
The following screen will be displayed when reading has been completed.
2. Converting Configuration Data
In the data read with the Network Configurator, right-click the NE1A-SCPU01
that is to be changed to the NE1A-SCPU01-V1 or NE1A-SCPU02 and select
Change Device Type from the pop-up menu.
Device type after change
NE1A-SCPU02
Unit Ver. 1.0 Unit Ver. 2.0
OK OK
OK OK
--- OK
Not possible OK
Not possible ---
Not possible Not possible
Not possible Not possible
NE1A- NE1A-
SCPU01-EIP SCPU02-EIP
Unit Ver. 1.0 Unit Ver. 1.0
OK OK
OK OK
Not possible OK
OK OK
Not possible OK
--- OK
Not possible ---
7
xxix