Command Reference: Logic Functions
8-4
Command Reference: Logic Functions
8-4-1
NOT
Diagram
General Description
Truth Table
8-4-2
AND
Diagram
General Description
Optional Input Settings
The output will be the inverse of the input.
Input 1
Output 1
0
1
1
0
0: OFF, 1: ON
Default
An AND of the input conditions will be output. Up to eight input conditions can
be evaluated.
The number of inputs can be increased on the In/Out Setting Tab Page in the
function block property dialog box.
Parameter
Setting range
Number of inputs
Maximum Number of Inputs
Default setting
1 to 8
2
Section 8-4
143