Connection Status Tables
12-8 Connection Status Tables
12-8-1 Outline
If an error occurs when the NE1A-series Controller tries to establish a safety
connection with a DST1-series Safety I/O Terminal or an NE1A-series Con-
troller set as a Slave, the 7-segment display will display the error code "d6" or
"d5." If an error occurs during I/O communications, the 7-segment display will
display the error code "dA" or "bA."
Check the status code (error code) shown on the Safety Connection Tab Page
in the Monitor Device Window and take the corresponding countermeasure.
Section 12-8
253