Omron NE1A-SCPU01 - 07-2009 Operation Manual page 95

Wiring
1,2,3...
NE1A
35 mm
1. Lay the twisted-pair cable.
2. Connect the cable to the switching hub. Be sure to press in the cable until
it locks into place. This procedure should only be performed by qualified
personnel.
3. Connect the twisted-pair cable to the connector on the NE1A-series Con-
troller.
Be sure to press the connectors (both the switching hub side and Ethernet
side) until they lock into place.
Section 3-2
61