Procedure of the country setting confirmation
Make sure that the country setting is correct. Refer to the below Figure about the setting.
(1)
Push the MODE key
or
No operation for 150seconds
(2)
Push << key
(3)
Push the MODE key
(4)
(1) In the normal display, if you press the MODE key for 5 second, display change to the selection display.
(2) In the selection display, push >> and choose "Check".
(3) After you choose "Check", push the ENT key.
(4) Display shows the country setting. Make sure the name of a country .
(5) Push the MODE key to return the selection display. After that push the MODE key to return normal
display.
Grid Connect Photovoltaic Inverter KP100L-OD- USER'S MANUAL
Pac
30s
0.00/0.00/0.00kW
Push the MODE key
for 5 second
ModeSelect
ErrLog [Setup] Che
Push
key
>>
ModeSelect
Setup [Check] ErrL
Push the ENT key
Check:Country
GER
Push the MODE key
or
No operation for 150seconds
3 Operation
3
9
3 - 7