Omron KP100L-OD - 12-2010 User Manual page 9

CAUTION
Burn injury may occasionally occur. Do not touch the upper part of the product while
operating or immediately after having turned off power.
Fire damage or functional lesion of internal part may occasionally occur. Do not
obstruct the heat sink or place any objects within 200mm of the heat sink.
Fire damage and malfunction may occasionally occur. Do not use the product that
dropped or applied a strong impact.
Breakdown of DC input plug may occasionally occur. Do not put the product on
ground with it had the DC input plug side below.
Injury may occasionally occur. Transport and place the product carefully by two
persons or more.
Functional lesion by the fall of the product may occasionally occur. Use the
installation parts and materials that are included in the product.
Functional lesion by fire damage of terminal may occasionally occur. Detach the MC
connector by the state that turns off the breaker of the solar modules side. In the
state that the current flows, inserting and removing of the MC connector is not
allowed.
Break down or deterioration of the solar modules may occasionally occur. Install the
breaker between the transformer and the KP100L when you connect the transformer.
Connect the Neutral of the transformer to the earth.
Breakdown of internal part by static electricity may occasionally occur. Execute
wiring after discharging static electricity.
Functional lesion by fire damage may occasionally occur. Confirm there is no
looseness of the AC cable clamp, the communication cable clamp and the AUX cable
clamp. Confirm the MC connector is locked.
Injury or fire by electric shock may possibly occur. Do not open, disassemble,
modify, or repair the cover front and the cover foreside L during operating
Human hazard by electric shock or property damage by fire damage may
occasionally occur. Mount the enclosed MC caps onto MC connector that is not
used.
Electric shock or fire by the foreign body going into the product may occasionally
occur. Prevent the foreign body from invading from the cover foreside R when
wiring.
Functional lesion by injury and fire damage by the fall of the product may
occasionally occur. Install the product in the location where the weight (41.5kg) of
the product can be endured (the power of 176N•m torque per one screw can be
endured).
8
Grid Connect Photovoltaic Inverte KP100L-OD-USER'S MANUAL