Omron KP100L-OD - 12-2010 User Manual page 75

3 Operation
 User's setup
In the mode of User's setup, you can set the language of display and the communication's parameter, etc.
In the selection display, the display changes into the mode of User's setup if you select "Setup" and push the ENT
key. When you set the item in the mode of User's setup, relay turns off and power generation stops.
ModeSelect
ErrLog [Setup] Che
MODE ENT
Setup:Language
ENG
>>
<<
Setup:COM_Prot
Auto
<< >>
In the mode of User's setup, select the items that you want to set by the "<<" and ">>" key and decision the item
by the ENT key. Next, select the value that you want to set by the "<<" and ">>" key and decision the set value by
the ENT key.
It back to the display of the item selection without changing a set value when you push the MODE key while you
change a set value. It returns to the selection display when you push the MODE key while displaying the item
selection.
Refer to the following table for the item and the set value that you can set.
3 - 12
ENT
Setup:Language
[ENG]
MODE
ENT
Setup:COM_Prot
[Auto]
MODE
ENT
After five
Setup:COM_Prot
seconds pass
Auto
Grid Connect Photovoltaic Inverter KP100L-OD- USER'S MANUAL
>>
Setup:Language
[ITA]
<<
>>
Setup:COM_Prot
[Compoway]
<<
When the setting has been setting,
Setup value does the blinking display.
>>
<<
>>
<<