Functions And Settings - Omron GRT1 - 11-2007 Operation Manual

Temperature Input Units
6-4-4

Functions and Settings

Moving Average
Processing
Setting Procedure (Example: DeviceNet Configurator)
1,2,3...
188
3. Open the tab page for the input for which temperature data is to be select-
ed, and select from the pull-down list the type of data to be allocated as the
Temperature Data.
4. Return to the General Tab Page, click the Download Button, and then click
the Reset Button to reset the Unit.
5. Click the OK Button to exit.
This function calculates the average value (moving average) of the previous
eight inputs, and uses the resulting value as conversion data. When the input
value fluctuates frequently, averaging can be used to produce a stable input
value, as shown in the following diagram.
Temperature input value
1. In the Network Configuration Window, double-click the icon of the Slice I/O
Terminal that is to be set. Alternatively, right-click the icon and select Pa-
rameters - Edit. The Edit Device Parameters Window will be displayed.
2. Select the Temperature Input Unit to be edited from the I/O Module Tab
Page.
3. Click the Edit Button on the I/O Module Tab Page. The Edit Unit Parame-
ters Window will be displayed.
Section 6-4
Actual input
Averaged input
Time