Omron GRT1 - 11-2007 Operation Manual page 292

GRT1-CP1-L Positioning Unit
Case 2: UL0 < LL0
LL0
UL0
CNT
OUT0
■ Setting a Comparison Range
Enter the desired values in the Lower limit and Upper limit Fields. The values
can be between –2,147,483,648 (8000 0000 hex) and 2,147,483,647 (7FFF
FFFF hex).
These settings are stored in non-volatile memory. If a setting is changed, the
new value is effective immediately.
The range will be disabled if the range values are set to the minimum and
maximum values.
■ Default Settings
Press the Default Setting Button on the Range 0 or Range 1 Tab Page to set
the following default values.
Setting
Range 0
Range 1
Default value
Disabled. (Option not selected.)
Disabled. (Option not selected.)
Section 7-5
271