Unit Comments - Omron GRT1 - 11-2007 Operation Manual

Functions Shared by all Units
2-3-5

Unit Comments

Function Overview
Setting with a
Programming Device
1,2,3...
22
3. Click the Edit Button to display the Edit Unit Parameters Window.
4. Input the desired monitor value in the Unit Conduction Time Field.
5. Click the Download Button, and then click the Reset Button to reset the
Unit.
6. Click the OK Button.
The user can assign and record a name or comment for every Unit (up to 32
characters). The network Programming Device can be used to read and write
these Unit names (comments).
Slice I/O Unit
This example shows how to use the DeviceNet Configurator (version 2.43 or
higher) to set the Unit Comments.
1. Open the Network Configuration Window and double-click the desired
Slice I/O Terminal's icon or right-click the icon and select Parameters -
Edit to display the Edit Device Parameters Window.
Set a Unit name with the
Programming Device.
Unit comment
Recorded in Unit
Section 2-3