Temperature Input Units
Setting Procedure (Example: DeviceNet Configurator)
1,2,3...
210
(3) The meaning of the cumulated count depends on the decimal point posi-
tion of the temperature value.
Temperature input value
Division width (See note.)
Note The following table shows the divisions for the cumulative counter.
Unit
Divisions
Hour
12 s
Minute 200 ms
1. In the Network Configuration Window, double-click the icon of the Slice I/O
Terminal that is to be set. Alternatively, right-click the icon and select Pa-
rameters - Edit. The Edit Device Parameters Window will be displayed.
2. Select the Temperature Input Unit to be edited from the I/O Module Tab
Page.
3. Click the Edit Button on the I/O Module Tab Page. The Edit Unit Parame-
ters Window will be displayed.
4. Select the tab page for the input where the cumulative counter is to be set,
and select the Cumulated Count Check Box in the Function Choice Area.
Cumulated value
(°C × hours or °C × minutes)
Number of integrations
300 times
300 times
Section 6-4
Time