Omron GRT1 - 11-2007 Operation Manual page 206

Slice i/o units
Table of Contents

Advertisement

Temperature Input Units
Temperature Data 1/100
Display Mode
(Temperature Data (1/100))
Top/Valley Detection
Timing Flags (Shot Status)
Temperature Status Flags
(Temperature Status)
The data format used for allocating data in the Master is shown below. Data is
allocated as two's complements (4 bytes = 2 words).
15
This format is used to allocate temperature data in 1/100 Display Mode. The
data format used when allocated in the Master is shown below. The data is
given as two's complements (8 bytes = 4 words).
15
These flags turn ON for the one-shot time when detecting the top or valley for
the top/valley hold function.
These flags are used to time reading the values held as the top and valley val-
ues at the Master. The following data format is used when these flags are allo-
cated in the Master (2 bytes = 1 word).
Bit 7
+0
0
+1
0
The details of each byte are shown in the following table.
Byte
Abbreviation
+0
V_STx
+1
T_STx
Note The one-shot time can be changed. For details, refer to the one-shot time set-
tings for the top/valley hold function.
The Temperature Status Flags include allocations for the Comparator Result
Flag, the Top/Valley Detection Timing Flags, and the Off-wire Detection Flags.
These flags are used for detection and monitoring.
The data format used for each byte when these flags are allocated in the Mas-
ter is shown below (2 bytes = 1 word).
Bit 7
Bit 6
+0
BW0
T_ST0 V_ST0
+1
BW1
T_ST1 V_ST1
Temperature Data for Input 0
Temperature Data for Input 1
Temperature Data for Input 0
Temperature Data for Input 0
Temperature Data for Input 1
Temperature Data for Input 1
Bit 6
Bit 5
Bit 4
0
0
0
0
0
0
Name
Valley Detection Tim-
ing Flag
Top Detection Timing
Flag
Bit 5
Bit 4
Bit 3
HH0
H0
HH1
H1
Section 6-4
0
0
Bit 3
Bit 2
Bit 1
0
0
V_ST1
0
0
T_ST1
Details
Turns ON when a valley is
detected by the valley hold
function and then turns OFF
after the one-shot time has
elapsed.
Turns ON when a top is
detected by the top hold func-
tion and then turns OFF after
the one-shot time has elapsed.
Bit 2
Bit 1
Bit 0
PS0
L0
LL0
PS1
L1
LL1
Bit 0
V_ST0
T_ST0
Input
0
Input
1
185

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartslice - 11-2007Smartslice grt1 series

Table of Contents