Analog Output Units
Setting Procedure (Example: DeviceNet Configurator)
1,2,3...
Monitor values can also be set in the Unit. When the cumulated count value
exceeds the set monitor value, the Cumulative Counter Flag in the area for
Generic Status Flags turns ON.
Analog output value
Division width
(See note.)
Note The following table shows the divisions for the cumulative counter.
Unit
Hour
Minute
1. In the Network Configuration Window for the Slice I/O Terminal, double-
click the icon of the Slice I/O Terminal that is to be set. Alternatively, right-
click the icon and select Parameters - Edit. The Edit Device Parameters
Window will be displayed.
2. Click the I/O Module Tab.
3. Click the Edit Button on the I/O Module Tab Page. The Edit Unit Parame-
ters Window will be displayed.
Cumulated value (count
× hour or minute)
Divisions
3.6 s (1/1,000 hour)
60 ms (1/1,000 minute)
Section 5-5
Time t
151