Omron GRT1 - 11-2007 Operation Manual page 289

GRT1-CP1-L Positioning Unit
Preset Tab Page
268
■ Default Settings
Press the Default Setting Button on the General Tab Page to set the following
default values.
Setting
Counter Input Mode
Action on Input Rising Edge
Action on Input Falling Edge
Action upon Bus Error
Action upon Bus Idle
Configuration tag
The Preset Tab Page is used to set the counter to a preset value. The counter
can be set to the preset value using the Action on Input Rising Edge or Action
on Input Falling Edge setting for the digital input or using the Preset Com-
mand Bit (bit 10 of word n+2).
Click the Preset Tab in the Edit Unit Parameters Window. The Preset Tab
Page will be displayed.
Default value
Phase differential ×1
No Action
No Action
Outputs are cleared.
Outputs are cleared.
(Not affected.)
Section 7-5