Cj1W-Od202 Transistor Output Unit (8 Points) - Omron CJ2 CPU UNIT User Manual

Cj2 cpu unit hardware
Hide thumbs Also See for CJ2 CPU UNIT:
Table of Contents

Advertisement

CJ1W-OD202 Transistor Output Unit (8 Points)

Name
Model
Rated Voltage
Operating Load Voltage Range
Maximum Load Current
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
Load Short-circuit Protection
Line Disconnection Detection
Insulation Resistance
Dielectric Strength
Number of Circuits
Internal Current Consumption
Fuse
External Power Supply
Weight
Circuit Configuration
CJ2 CPU Unit Hardware User's Manual
8-point Transistor Output Unit with Terminal Block (Sourcing Outputs)
CJ1W-OD202
24 VDC
20.4 to 26.4 VDC
2 A/point, 8 A/Unit
0.1 mA max.
1.5 V max.
0.5 ms max.
1.0 ms max.
Detection current: 6 A min.
Automatic restart after error clearance. (Refer to page A-149.)
Detection current: 200 mA (Refer to page A-149.)
20 MΩ between the external terminals and the GR terminal (100 VDC)
1,000 VAC between the external terminals and the GR terminal for 1 minute
at a leakage current of 10 mA max.
8 (4 points/common, 2 circuits)
110 mA max.
None
24 VDC, 50 mA min.
120 g max.
Output indicator
ERR indicator
• The ERR indicator will light and the corresponding bit in A050 to A069
(Basic I/O Unit Information, two points per bit) will turn ON if an overcur-
rent or line disconnection is detected.
Appendices
Signal
name
COM0 (+V)
OUT0
to
OUT3
0 V
COM1 (+V)
OUT4
to
OUT7
0 V
A-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents