Cj1W-Od232 Transistor Output Unit (32 Points) - Omron CJ2 CPU UNIT User Manual

CJ1W-OD232 Transistor Output Unit (32 Points)

Name
Model
Rated Voltage
Operating Load Volt-
age Range
Maximum Load Cur-
rent
Leakage Current
Residual Voltage
ON Response Time
OFF Response Time
Load Short-circuit
Protection
Insulation Resistance
Dielectric Strength
Number of Circuits
Internal Current Con-
sumption
External Power Sup-
ply
Weight
Accessories
Circuit Configuration
CJ2 CPU Unit Hardware User's Manual
32-point Transistor Output Unit with MIL Connector (Sourcing Outputs)
CJ1W-OD232
24 VDC
20.4 to 26.4 VDC
0.5 A/point, 2.0 A/common, 4.0 A/Unit
0.1 mA max.
1.5 V max.
0.5 ms max.
1.0 ms max.
Detection current: 0.7 to 2.5 A
Automatic restart after error clearance. (Refer to page A-149.)
20 MΩ between the external terminals and the GR terminal (100 VDC)
1,000 VAC between the external terminals and the GR terminal for 1 minute at a leak-
age current of 10 mA max.
32 (16 points/common, 2 circuits)
5 VDC 150 mA max.
20.4 to 26.4 VDC, 70 mA min.
80 g max.
None
COM0 (+V)
COM0 (+V)
OUT0
OUT15
SW
Output indicator
OUT0
OUT15
ERR indicator
• The ERR indicator will light and the corresponding bit in A050 to A069 (Basic I/O Unit
Information, one for each common) will turn ON if an overcurrent is detected.
Signal Allocated
name
CIO word
Wd m
to
0 V
COM1 (+V)
COM1 (+V)
to
Wd m+1
0 V
Appendices
A-41