Others
Name
DIN Track
Programming Device Connecting
Cable for peripheral (USB) port
Programming Device Connecting
Cables for serial port
Connecting Cable for EtherNet/IP
port*
Communications Adaptor (RS-422A
Converter)
RS-232C/RS-422A Link Adapter
MIL Flat Cable Connector for Pulse
I/O Modules
Connector-Terminal Block Conver-
sion Units
Connector-Terminal Block Conver-
sion Cables
Servo Relay Units
* CJ2H-CPU6@-EIP or CJ2M-CPU3@ only.
CJ2 CPU Unit Hardware User's Manual
2 Basic System Configuration and Devices
Model
PFP-50N
Track length: 50 cm, height: 7.3 mm
PFP-100N
Track length: 1 m, height: 7.3 mm
PFP-100N2
Track length: 1 m, height: 16 mm
PFP-M
Stopper to prevent Units from moving on the track.
Two each are provided with the CPU Unit and with
an I/O Interface Unit.
Commercially avail-
USB 2.0 (or 1.1) cable (A connector - B connec-
able USB cable
tor), 5.0 m max.
XW2Z-200S-CV
Connects to IBM PC/AT computer
D-Sub 9-pin connector (Cable length: 2.0 m).
Uses static-resistant connector.
XW2Z-500S-CV
Connects to IBM PC/AT computer
D-Sub 9-pin connector (Cable length: 5.0 m).
Uses static-resistant connector.
XW2Z-200S-V
Connects to IBM PC/AT computer
D-Sub 9-pin connector. (Cable length: 2.0 m)
XW2Z-500S-V
Connects to IBM PC/AT computer
D-Sub 9-pin connector. (Cable length: 5.0 m)
Recommended: Fujikura F-LINK-E 0.5 mm × 4P
Commercially avail-
able 100Base-TX
Twisted-pair cable with RJ45 Modular Connectors
twisted-pair cable
on both ends. Connect between EtherNet/IP Unit
or built-in EtherNet/IP port and Ethernet switch.
Use STP (shielded twisted-pair) cable of category
5 or 5e.
CJ1W-CIF11
Current consumption at 5 V: 0.04 A
NT-AL001
Maximum distance: 500 m; only RS-422A is sup-
ported.
Current consumption at 5 V: 0.15 A
XG4M-4030-T
40-pin MIL connector, pressure-welded type (This
connector is used by user to make a cable.)
XW2D-40G6
Slim model (M3 screw terminals), 40 terminals
XW2B-40G5
Through model (M3 screw terminals), 40 termi-
nals
XW2B-40G4
Through model (M3.5 screw terminals), 40 termi-
nals
XW2Z-100K
Cable length: 1 m
XW2Z-150K
Cable length: 1.5 m
XW2Z-200K
Cable length: 2 m
XW2Z-300K
Cable length: 3 m
XW2Z-500K
Cable length: 5 m
XW2B-20J6-8A
To connect one axis
XW2B-20J6-9A
To connect two axes
Specifications
2
2-9