Din Track Installation - Omron CJ2 CPU UNIT User Manual

5-2-5

DIN Track Installation

Use the following procedure to install a CJ-series PLC on DIN Track.
1
Release the pins on the backs of the CJ-series Units.
DIN Track
mounting pins
2
Fit the back of the PLC onto the DIN Track by inserting the top of the track and then pressing in
at the bottom of the PLC, as shown below.
2
3
Lock the pins on the backs of the CJ-series Units.
CJ2 CPU Unit Hardware User's Manual
Release
1
DIN Track
DIN Track
mounting pins
5 Installation
5
5-15