Symbol Definitions - Extron electronics DXP HD 4K PLUS User Manual

Symbol Definitions

• = Space
= Carriage return with line feed
]
= Carriage return with no line feed
}
|
or
= Escape key
E
or W
= Superscripts indicate the error message displayed if the command is entered incorrectly or with
24
invalid parameters (see
X!
= Input number
X@
= Output number
X#
= Enable or disable
X$
= Name
NOTE: The pipe (
are permitted.
X%
= Analog audio and S/PDIF output
number
X^
= HDCP Authorized device
X&
= Input HDCP status
X*
= Output format — DXP 42
Output format — DXP 44, 84, 88,
168, and 1616 PLUS
X(
= Color bit depth
X1)
= HDCP mode
Error Responses
|
) character cannot be used in names. All other characters, including symbols and spaces,
on page 61).
1 through maximum number of inputs
<
0 = untie (for ties If applicable)
1 through maximum number of outputs
<
1 2
DXP 42 PLUS: or
DXP 44 and 84 PLUS:
DXP 88 and 168 PLUS:
1-16
DXP 1616 PLUS:
0 = untie (for ties if applicable)
0 = disable
1 = enable
16 alphanumeric characters (12 characters for room names)
1 or 2
0 = block HDCP encryption
1 = allow HDCP encryption (default)
0 = no source detected
1 = source is HDCP compliant
2 = source is not HDCP compliant
0 = auto (default)
1 = DVI (RGB 4:4:4, 0-255, no audio, no InfoFrames)
2 = HDMI RGB Full (RGB 4:4:4, 0-255, audio, InfoFrames)
3 = HDMI RGB Limited (RGB 4:4:4, 16-235, audio, InfoFrames)
4 = HDMI YUV Limited (YUV 4:4:4, 16-235, audio, InfoFrames)
5 = HDMI YUV Limited (YUV 4:2:2, 16-235, audio, InfoFrames)
6 = HDMI YUV Limited (YUV 4:2:0, 16-235, audio, InfoFrames)
0 = pass-through (default)
1 = RGB (color quantization follows input)
2 = YUV 444 (color quantization follows input)
3 = YUV 422 (color quantization follows input)
0 = auto (default)
1 = force 8-bit
0 = auto (follow the input, default)
1 = on (always encrypt HDMI outputs)
2 = none (do not send HDCP content to the sink)
(DXP 42 only)
DXP HD 4K PLUS Series • SIS Configuration and Control
>
>:
1-4
1-8
63