Extron electronics DXP HD 4K PLUS User Manual page 40

2. Select video or audio by pressing the I/O button until the desired LED lights (green for video or red for audio).
NOTE: You cannot select both audio and video for a tie at the same time. You must repeat the tie process
for each type of tie (audio and video) that you want to create for the desired input and output.
For example, first create a video tie between an input and output, then create an audio tie for the same
input and output.
I/O
Press I/O button to
select audio or video.
I/O
Figure 40. Selecting Audio or Video using the I/O Button
3. Press the desired input button.
The LED lights to indicate the selection.
1
Figure 41. Selecting an Input for the Tie
4. Press the output buttons to which the input is being tied. Each selected output LED blinks green for a video
tie or red for an audio tie. The Enter LED also blinks to indicate that a tie has been initiated.
NOTE: In this example, an audio tie is being created. On the DXP 44, 84, and 88 PLUS models, audio ties
can be made only to output 2.
Press the Output 2 button.
• Green blinking LED indicates a video-only tie.
• Red blinking LED indicates an audio-only tie
(de-embedded audio output 2).
2
or
ENTER
Blinking green LED indicates
the need to confirm the change.
Figure 42. Selecting an Output for the Tie
5. Press the Enter button. All button LEDs turn off.
Adding a tie to a set of ties — DXP 44, 84, and 88 PLUS
To add a new tie to a configuration:
1. Press and release the Esc button.
2. To select only video for the tie, press and release the I/O button to toggle video on. The Video LED lights
green when video is enabled. Deselect audio by pressing the I/O button until the Audio LED is unlit (see
figure 43).
Press the I/O button to toggle video on.
VIDEO
The Video LED lights green when video is
I/O
Press the I/O button to toggle audio off.
AUDIO The Audio LED is unlit when audio is deselected.
Figure 43. Selecting Video Only
To select only audio for the tie, press and release the I/O button to toggle audio on. The Audio LED lights
red when audio is enabled. Deselect video by pressing the I/O button until the Video LED is unlit.
VIDEO
Lights green when video is selected.
AUDIO
Lights red when audio is selected.
2
DXP HD 4K PLUS Series • Operation 32