Table of Contents
Advertisement
Input 5 video tied to
outputs 1, 2, 3, and 4
Input 5 audio tied to
outputs 1, 2, and 3
Input
5
1
2
Output
3
4
5
6
7
8
.
Figure 32.
Final Configuration for the Example
Viewing a tie configuration — DXP 168 and 1616 PLUS
You can view the current set of video and audio ties using the front panel buttons. The view-only mode prevents
inadvertent changes to the current configuration. View-only mode also provides a way to mute outputs (see
Muting and Unmuting Outputs from the Front Panel
To view ties on the DXP 1616 PLUS series:
1. Press and release the Escape button.
Press the Escape button to
clear all
selections.
CONTROL
ENTER
PRESET
ESCAPE
VIEW
The button blinks
once.
Figure 33. Clear All Selections
2. Select the input or outputs whose ties you want to view by pressing the input or output buttons.
•
View ties by selecting an input — Press an input button. All buttons light for the outputs that are tied to
the selected input.
•
View ties by selecting an output — Press an output button. The button for the tied input and all of the
output buttons light for outputs that are also tied to the same input.
NOTE:
•
Only outputs 1 through 4 can have audio ties (analog).
•
If you press an output button while an input is selected for viewing, the output LED blinks to
indicate a pending tie. Press Escape to cancel the tie or Enter to add the tie to the selected
input.
•
in a configuration — Press and release each input and output button, one at a time. The output buttons
light as follows:
•
Green — Video-only ties
•
Red — Audio-only ties (outputs 1 through 4 only)
•
Amber — Audio and video ties (outputs 1 through 4 only)
•
Select both video and audio for viewing — Press and release the Video and Audio buttons as
necessary until both are lit.
Video
Audio
on page 40).
DXP HD 4K PLUS Series • Operation
29
Advertisement
Table of Contents
