Muting Outputs - Dxp 44, 84, And 88 Plus - Extron electronics DXP HD 4K PLUS User Manual

4k hdmi switchers
Table of Contents

Advertisement

Muting Outputs — DXP 44, 84, and 88 PLUS
To mute and unmute outputs:
1. Press Esc to clear any leftover button selections or incomplete ties.
2. Select video or audio by pressing the I/O button until the desired LED lights (green for video or red for audio).
Press I/O button to
select audio or video.
Figure 71. Selecting Audio or Video to Mute
3. Press the button for the output to be muted, and hold it until its LED begins to blink (approximately 2
seconds). The LED continues to blink until the output is unmuted.
Press and hold the desired
Output button.
1
NOTE: Video is muted in this example.
Figure 72. Muting an Output
Unmuting outputs — DXP 44, 84, and 88 PLUS
To unmute an output, press and hold the desired output button until its LED stops blinking (approximately 2
seconds).
NOTE: If you want to mute an output, but accidentally press an input button prior to pressing and holding the
desired output, this voids the output muting process and activates the tie process.
Viewing the Mute Status — DXP 44, 84, and 88 PLUS
To check the mute status of an output:
1. Press the Esc button to clear any previous selections.
2. Select video or audio by pressing the I/O button until the desired LED lights (green for video or red for audio).
3. Press the button for the output to be viewed.
If the selected output is muted, the button LED blinks red (audio) or green (video), depending on your
viewing selection in step 2.
If the selected output is not muted, the LED for its button lights steadily.
4. If desired, press the I/O button again to view the mute status of the other signal type. For example, after
viewing the audio mute status of an output and before it times out, press the I/O button again to view the
video status of the same output.
5. To exit the view mode, press Esc or wait for the indicators to time out.
VIDEO
I/O
Lights green when video is selected.
I/O
AUDIO
Lights red when audio is selected.
2 seconds
1
The button blinks to
Green = Video is muted.
Red = Audio is muted.
DXP HD 4K PLUS Series • Operation
43

Advertisement

Table of Contents
loading

Table of Contents