Table of Contents
Advertisement
NOTES:
•
An output can be tied to only one input. If you tie an input to an output that is already tied to another
input, the older tie is broken in favor of the newer one.
•
If an input with no tie is selected, only the button for the selected input lights (no output buttons or LEDs
light).
•
As each input and output is selected, the associated output button blinks the appropriate color to
indicate a tentative tie. Buttons for outputs that were already tied to the input light the appropriate color
steadily. Outputs that are already tied can be left on, along with new blinking selections, or toggled off
by pressing the associated output button.
•
When the Video and Audio buttons are lit, if an input with an audio tie but no video tie is selected, the
input button lights amber and the output button lights the appropriate color (red, green, or amber).
DXP 44, 84, and 88 PLUS Configuration
To create or change a configuration on the DXP 44, DXP 84, and DXP 88 PLUS:
1. Press the Esc button to clear any input, output, or control indicators that may be lit.
2. Select to configure video or audio by repeatedly pressing the I/O button until the desired LED is lit (green
LED for video or red for audio).
3. Select the desired input and outputs by pressing the input and output buttons.
•
The input LEDs light one of the following colors:
•
Green — Video only ties
•
Red — Audio only ties
•
The output LEDs light or blink one of the following colors:
•
Green — Video only ties
•
Red — Audio only ties (output 2 only)
NOTES:
•
To indicate potential ties, output LEDs blink in the appropriate color when an input is selected.
•
To indicate current ties, output LEDs light steadily in the appropriate color when an input is
selected.
•
To clear unwanted outputs, press and release the associated output buttons whose LEDs are lit. To
indicate potential unties, output LEDs blink the appropriate color when an output is deselected (muted)
but not untied from the input.
4. Press and release the Enter button to accept the tie or to break an existing tie.
5. Repeat steps 1 through 4 to create or clear additional ties until the desired configuration is complete.
NOTES:
•
Only one input can be tied to any output. If you tie an input to an output that is already tied to
another input, the older tie is broken in favor of the newer tie.
•
If an input with no tie is selected, only the LED for the selected input lights (no output LEDs light).
•
As each input and output is selected, the associated output LED blinks the appropriate color to
indicate a tentative tie. LEDs for outputs that were already tied to the input light the appropriate
color steadily. Outputs that are already tied can be left on, along with new blinking selections, or
toggled off by pressing the associated output button.
DXP HD 4K PLUS Series • Operation
24
Advertisement
Table of Contents
