Making Copies On The Automatic Document Feeder (Xl2140Df) - Xerox WorkCentre XL2120 User Manual

(2 1)
è
è
(2 2)
è
(1 2)
è
(1 1)
Making Copies on the Automatic
Document Feeder
The XL2140df Automatic Document Feeder (ADF) allows you to
automatically make single sided or two-sided copies. The ADF
holds up to 30 originals (20 lb/80 gsm). Ensure originals are in
good condition, and that all staples and paper clips have been
removed. Use the Document Glass to make copies from
transparencies, facsimile paper, or originals having other
unusual characteristics. For reliable copying operation, use
originals within the following ranges:
Paper weight range:
Paper size range: 5.5 8.5"/A5 (Short Edge feed only)
8.5 11"/A4 and 8.5 14"/216 353 mm
The ADF comes from the factory with the Auto Start feature
disabled. Refer to Customizing Your WorkCentre
this User Guide for information about changing this setting.
Note: Automatic two-sided copying is available only in the
copying mode, not the print mode.
The available copy options are:
Icon
Two-sided
(2 1)
è
Two-sided
è
(2 2)
Single sided
(1 è 2)
Single sided
è
(1 1)
Single sided original to single sided copies (1
This mode will create single sided copies from your originals.
1. Place the originals face up in the ADF.
2. Select the icon (1 to 1) and any additional features
and the desired quantity.
3. Press Start to begin copying.
The WorkCentre will produce the requested number of
uncollated (1,1,1...2,2,2...3,3,3...) single sided sets.
(XL2140df)
16 to 24 lb/60 to 90 gsm
Original Copy
Single sided
Two-sided
Two-sided
Single sided
section of
Max Quantity
100 sets
1 set
1 set
100 sets
è è è è
1)
17