Flashing - Xerox WorkCentre XL2120 User Manual

14
Loading Paper
4. Fan the paper and insert it into the tray.
Ensure that the paper corners are under the corner
snubbers.
Do not fill above the max fill line.
5. Close the Paper Tray.
6. If copying, press Start to continue. If printing, the job will
automatically resume.
To cancel the flashing P without restarting copying, press
the Clear key.

Flashing

When the Alternate Paper Tray runs out of paper, or the paper
misfeeds, the P will flash in the display and the green indicator in
the WorkCentre diagram will flash.
Alternate Paper Tray
1. Add paper if the Alternate Paper Tray is empty
2. If paper has misfed, remove it by carefully pulling the edge
of the paper in the direction of the arrow.
3. If copying, press the Start key to continue.
If printing, press the On-line/Off-line key to continue.
XL2140df only