Xerox WorkCentre XL2120 User Manual page 16

Installation
(continued)
6. Secure the Paper Tray Lock and the Shipping Screw in the
locations shown.
Turn the Paper Tray Lock to secure.
Note: Save the Paper Tray Lock and the shipping screw.
They will be needed if the WorkCentre has to be moved.
7. Load paper into the tray.
Refer to the Loading Paper
additional information.
Do not fill above the max line.
8. Push the Paper Tray firmly back into the WorkCentre.
Note: Ensure that the Alternate Paper Tray is lowered.
9. Press the Release Latch to open the Side Cover.
10. Remove the Caution tape from the cover.
11. Remove the two red Fuser Pins, one at a time, by pulling
the string upward.
Discard the Fuser Pins.
Note: Misfeeds will occur if the Fuser Pins are not
removed.
CAUTION: Ensure that the Side Cover is always open before
opening the Front Cover.
12. Press the Front Cover Release Button, located on the top left
side of the Front Cover, to open.
section of the User Guide for
XL2140df only
7