Xerox WorkCentre XL2120 User Manual page 41

32
WorkCentre Care
Cleaning the Document Glass and Cover
Keeping the Document Glass clean helps ensure the best
possible copies. Xerox suggests that you clean the Document
Glass at the start of each day and during the day as needed.
CAUTION: Do not pour or spray water directly onto any part of
the WorkCentre.
1. Slightly dampen a soft lint-free cloth or paper towel with
water.
2. Wipe the surface of the Document Glass until it is clean and
dry.
3. Wipe the underside of the white Document Cover until it is
clean and dry.
4. Close the Document Cover.
Cleaning the Corotron Wire
If copies start getting streaks or blotches, the Corotron Wire may
be dirty.
Note: Ensure that the Alternate Paper Tray is lowered
(XL2140df)
1. Press the Release Latch to open the Side Cover.
2. Remove the Green Corotron Wire Cleaner from inside the
copier (near the front corner of the machine).
3. Insert the Corotron Cleaner into the Corotron Wire Unit.
4. Wipe the Corotron Wire with the Corotron Cleaning Tool as
shown.
5. Replace the cleaner and close the Side Cover.