Power Reduction / Auto Clear - Xerox WorkCentre XL2120 User Manual

Power Reduction / Auto Clear

Power Reduction Modes automatically reduce power
consumed by the WorkCentre when the WorkCentre has not
been used for a set period of time. There are two modes of
power reduction; Power Save, and Power Shut-off.
Power Save Mode – The Ready Indicator will flash and the
other indicators will remain on. To copy from the Power Save
mode select the desired features and press Start. The copies
will be made automatically.
Power Shut-Off Mode – When the WorkCentre enters the
power shut-off mode the Ready Indicator will flash and the other
indicators will turn off. To copy from the power shut-off mode,
press the Start button, then, select the desired features and
press Start again. The copies will be made automatically.
Auto Clear – This WorkCentre is enabled at the factory to return
to the Normal Copy Mode approximately one minute after a job
is completed. Unless otherwise programmed, the Normal copy
Mode settings are as follows:
Copy Quality – Auto
Copy Lighter/Darker – Normal
Priority Tray – Tray 1
Priority Magnification – 100%
Quantity Selected – 1
Note: Time periods for the Power Shut-Off, Power Save, and
Auto Clear modes can be modified to meet your specific copying
needs. Refer to Customizing Your WorkCentre
User Guide for information about changing these settings.
section of this
11