Xerox WorkCentre XL2120 User Manual page 17

Installation
(continued)
8
13. Remove the Starter Toner Cartridge from the silver bag.
Vigorously shake the cartridge to loosen the toner.
Thoroughly shaking the cartridge will assure maximum
copies per cartridge.
Xerox has included a 2000 page yield Starter Toner
Cartridge. Purchased replacement toner cartridges will
yield approximately twice the number of copies at 5%
coverage.
14. Remove the Toner Cartridge Cover.
15. Slide the Toner Cartridge into the WorkCentre until it locks
into place.
16. Close the Front Cover and the Side Cover.
17. Plug the Power Cord into the WorkCentre and then into a
grounded outlet.
Turn on the Power Switch. In approximately two seconds the
ready indicator will light. Copying is now possible.
Note: Save the carton and packing materials. They should be
used to repack the WorkCentre if it has to be moved or shipped
for servicing.
18. Skip to the Printer Driver Software Installation
User Guide to set up the WorkCentre for printing
section in this