Xerox WorkCentre XL2120 User Manual page 11

Xerox workcentre xl2120: user guide
Table of Contents

Advertisement

Safety Notes
Slots and Openings in the cabinet and in the back and sides of the WorkCentre are provided for
ventilation. To ensure reliable operation of the WorkCentre and to protect it from overheating, these
openings must not be blocked or covered. The WorkCentre should never be located near or over a
radiator or heat register. This WorkCentre should not be placed in a built-in installation unless proper
ventilation is provided.
Never push objects of any kind into the slots of the WorkCentre as they may touch dangerous voltage
points or short out parts which could result in a fire or electric shock.
Never spill liquid of any kind on the WorkCentre.
Never remove covers or guards that require a tool for removal. There are no casual operator
serviceable areas within these covers.
Never defeat interlock switches. Machines are designed to restrict operator access to unsafe areas.
Covers, guards, and interlock switches are provided to ensure that the machine will not operate with
covers opened.
Use of an extension cord with this WorkCentre is not recommended or authorized.
Avoid direct viewing of the document lights. The lamps are bright and, while not harmful, they may
cause an annoying afterimage. Always keep the document cover closed during operation and
storage.
Avoid exposing the drum cartridge to light for extended periods of time.
Do not touch the green photoreceptor. Scratches or smudges that appear on the photoreceptor will
result in poor copy quality and may shorten the service life.
Do not put your hands into the fuser area, as you may be burned.
Ozone: This product produces ozone during normal operation. The ozone produced is dependent
on copy volume and is heavier than air. Providing the correct environmental parameter, as specified
in the Xerox installation procedures, ensure that concentration levels meet safe limits.
If you need additional safety information concerning the WorkCentre or Xerox supplied materials, you
may call the following toll-free number.
In the United States or Canada: 1 – 800 – 828 – 6571
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents