Xerox WorkCentre XK50cx Service Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer
  5. WorkCentre XK50cx
  6. Service manual
Xerox WorkCentre XK50cx Service Manual

Xerox WorkCentre XK50cx Service Manual

Hide thumbs Also See for WorkCentre XK50cx:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
SERVICE
INKJET PRINTER
- This Service Manual is a property of Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable
International and/or domestic law. -
INKJET PRINTER
WorkCentre XK50cx
Manual
CONTENTS
7. Electrical Parts List

Advertisement

Table of Contents
loading

Related Manuals for Xerox WorkCentre XK50cx

Summary of Contents for Xerox WorkCentre XK50cx

  • Page 1: Table Of Contents

    INKJET PRINTER WorkCentre XK50cx SERVICE Manual INKJET PRINTER CONTENTS 1. Precautions 2. Specifications 3. Disassembly and Reassembly 4. Circuit 5. Troubleshooting 6. Exploded Views and Parts List 7. Electrical Parts List 8. Block Diagrams 9. Schematic Diagrams - This Service Manual is a property of Samsung Electronics Co.,Ltd.

  • Page 2: Precautions

    1. Precautions Follow these safety, ESD, and servicing precautions to prevent personal injury and equipment damage. 1-1 Safety Precautions 1. Be sure that all built-in protective devices are in 7. Product Safety Notice: place. Restore any missing protective shields. Some electrical and mechanical parts have special safety-related characteristics which 2.

  • Page 3: Esd Precautions

    Precautions 1-2 ESD Precautions Certain semiconductor devices and CIS (Contact Image Sensor) can be easily damaged by static 4. Use only an “anti-static” solder removal device electricity. Such components are commonly called Some solder removal devices not classified as “Electrostatically Sensitive Devices”, or ESDs. “anti-static”...

  • Page 4: Specifications

    2. Specifications 2-1 Copier Scanner Type Flat-bed without ADF (Automatic Document Feeder) Maximum Original Size A4/Letter Maximum Paper Size A4/Letter/Legal Maximum Scan Width 216 mm Optical Resolution (HxV) 600 x 600 dpi Copy Quality Fast, Normal, Best Paper Type Selection Plain, Coated, Glossy, Transparency Mono Copy Speed Fast: 3cpm, Normal : 1.5cpm...
  • Page 5 Specification 2-2 Printer Technology Color Thermal Inkjet Engine Type 2-Pen (K and CMY) Operating System Win 3.1x, Windows 95/98/2000/NT 4.0 Interface IEEE 1284 (ECP Support), USB (without HUB Mode) Emulation HBP(GDI) Print Speed Mono 10ppm Draft / 8ppm Normal Color 5ppm Draft / 2ppm Normal Print Resolution (H x V) Quick...

  • Page 6: Power Supply

    Specification 2-4 Ink-head Mono Cartridge Color Cartridge Head Babbage 208 nozzles Birch 192 nozzles Ink type Pigment Ink Color Black Color (CMY) Ink Yield High yield : 1075 pages 200 pages Standard yield : 600 pages 2-5 Power Supply Rated AC Input Voltage 110 ~ 240 VAC (Universal) Rated Input Frequency 50 ~ 60 Hz...

  • Page 7: Environmental Condition

    Specification 2-7 Packaging Power Cord (USA Standard, Ivory) IEEE 1284 Cable USB Cable CD-ROM Ink Cartridge Mono 1 , Color 1 Manual 1vol. 2-8 Environmental Condition Absolute Storage Temperature C ~ 55 Absolute Storage Humidity 15% RH ~ 85% RH Recommended Temperature C ~ 32...

  • Page 8: Disassembly And Reassembly

    3. Disassembly and Reassembly 3-1 General Precautions on Disassembly When you disassemble and reassemble components, you must use extreme caution. The close proximity of cables to moving parts makes proper routing a must. If components are removed or replaced, any cables disturbed by the procedure must be replaced as close as possible to their original positions.

  • Page 9: Rear Cover

    Disassembly and Reassembly 3-3 Rear Cover 1. Remove four screws securing the rear cover. Separate the rear cover from the main cover.
  • Page 10 Disassembly and Reassembly 3-4 ADF Scanner Unit Assembly 1. Before you disassemble the scanner unit 4. Remove one screw and take out the PCB cover. assembly, you should remove Rear cover (See page 3-2) 2. Unplug three connector and remove the one screw securing the ground wire to the bracket.
  • Page 11 Disassembly and Reassembly 6. Rise the levers to an upright position, then take 8. Lift the scanner unit assembly slightly, then them out. pull it backward. Remove the assembly from the main cover. 7. Unlatch the harness cover by pushing on the bottom of the tabs upward, then remove the cover.

  • Page 12: Adf Unit

    Disassembly and Reassembly 3-5 ADF Unit 1. Before you disassemble the scanner, you should 4. Unlatch the bottom ends and remove the ADF remove: unit as shown below. ADF Scanner unit assembly (See page 3-3) Before you assemble or disassemble the scanner, you should take on the wrist strap device for ESD protection.
  • Page 13 Disassembly and Reassembly 3-6 ADF Motor Assembly 1. Before you disassemble the scanner, you should remove: ADF unit assembly (See page 3-5) 2. Remove one screw shown below and take out the ADF motor assembly cover. 3. Remove two screws and take out the ADF motor assembly.

  • Page 14: Scanner Unit

    Disassembly and Reassembly 3-7 Scanner Unit 1. Before you disassemble the scanner, you should 4. Unlatch the frame securing the glass and remove: remove it. ADF Scanner unit assembly (See page 3-3) Before you assemble or disassemble the scanner, you should take on the wrist strap device for ESD protection.
  • Page 15 Disassembly and Reassembly 6. Remove the cover of CCD cable. 8. Remove two screws and cover of the motor bracket. 7. Remove E-rings and lift holder pulleys and then lift the CCD unit with belt. 9. Remove two screws and take out the motor bracket.

  • Page 16: Control Panel Assembly

    Disassembly and Reassembly 3-8 Control Panel Assembly 1. Remove one screw securing the PCB cover to the 3. Unlatch the front cover by inserting a sharp main cover. Take out the PCB cover. tool to release the cover into the holes as shown.
  • Page 17 Disassembly and Reassembly 4. Remove two screws securing the OPE unit to 6. Remove the contact rubber from the unit. the main cover. Unlatch the OPE unit. Then, remove the OPE panel. 7. Remove the key pad from the unit. 5.

  • Page 18: Main Pba

    Disassembly and Reassembly 3-9 Main PBA 1. Open the scanner unit. 3. Remove two screws securing the main PBA to the main cover and unplug all connectors. Take out the main PBA. 2. Remove one screw securing the PCB cover. Take out the cover from the main cover.
  • Page 19 Disassembly and Reassembly 3-10 LIU PBA 1. Open the scanner unit. 3. Remove two screws securing the LIU PBA to the main cover and unplug all connectors. Take out 2. Remove one screw securing the PCB cover. the LIU PBA. Take out the cover from the main cover.
  • Page 20 Disassembly and Reassembly 3-11 Drive PBA 1. Before you disassemble the Drive PBA, you should remove: Rear cover. (See page 3-2) ASF unit. (See page 3-16) 2. Unplug all connectors from the Drive PBA. You should connect or remove the FPC cable vertically to avoid the FPC cable pin damage.
  • Page 21 Disassembly and Reassembly 3-12 SMPS 4. Remove one ground screw securing the SMPS 1. Before you disassemble the Drive PBA, to the main cover, then remove the SMPS. you should remove: Rear cover. (See page 3-2 ) 2. Unplug one connector from the SMPS. 3.

  • Page 22: All Covers (See Page 3-2,

    Disassembly and Reassembly 3-13 Main Cover 1. Before you disassemble the main cover, you 3. Pull the bottom ends on both sides apart to should remove: unlatch the cover from the main cover, then lift it up. Rear cover (See page 3-2) ADF Scanner unit assembly (See page 3-3) Control Panel assembly (See page 3-9) 2.

  • Page 23: Asf Unit

    Disassembly and Reassembly 3-15 ASF Unit 1. Before you disassemble the ASF unit, you should remove: Rear cover (See page 3-2) 2. Remove three screws securing the ASF unit to the cover bottom. Take out the ASF unit. 3. Unplug all connectors from the DHve PBA. Take the ASF unit.

  • Page 24: Engine Unit (See Page

    Disassembly and Reassembly 3-17 Cartridge Assembly 1. Before you disassemble the FPC cable you 4. Push the holder pulley to the right and take out should remove: the belt. All covers (See page 3-2, 3-9) ADF Scanner unit assembly (See page 3-3) Engine unit (See page 3-15) ASF unit (See page 3-16) Holder harness (See page 3-16)
  • Page 25 Disassembly and Reassembly 3-18 Carrier Motor 1. Before you disassemble the carrier motor 4. Push the holder pulley and remove the belt only. you should remove: All covers (See page 3-2, 3-9) ADF Scanner unit assembly (See page 3-3) Engine unit (See page 3-15) ASF unit (See page 3-16) Holder harness (See page 3-16) 2.

  • Page 26: Cartridge Assembly (See Page

    Disassembly and Reassembly 3-19 Roller Holder 1. Before you disassemble the FPC cable you 3. Pull the holder downward and take it out from should remove: the main frame. All covers (See page 3-2, 3-9) ADF Scanner unit assembly (See page 3-3) Engine unit (See page 3-15) ASF unit (See page 3-16) Holder harness (See page 3-16)
  • Page 27 Disassembly and Reassembly 3-21 Base Frame and Feed Roller 1. Before you disassemble the FPC cable you 3. Turn the bearing feed counterclockwise and should remove: take out the base frame and feed roller from All covers (See page 3-2, 3-9) the main frame.

  • Page 28: Circuit

    4. Circuit 4-1 Main PBA 4-1-1 Summary The main circuit that consists of CPU, MFP driver, modem and PC I/F controls the whole controller (built-in 32bit RISC processor core: system. The entire structure of the main circuit is as ARM7TDMI) including various I/O device follows: drivers, system memory, scanner, printer, motor Fig.4-1-1 Entire Structure of Main PBA Circuit...
  • Page 29 Circuit 4-1-2 MFP Controller (KS32C6400 : U15) MFP Controller consists of CPU (ARM7TDMI RISC • CHIP SELECT(/IP_CS, /ROM_CS1, /IUSB_CS, /MCS) processor), 4K-byte cache, data and address buses, - /IP_CS : U15 - 119 or U16 - 7, print head controller, parallel port interface, external DUOIP CHIP SELECT (LOW ACTIVE) DMA part to receive data from external color image - /ROMCS : U15 - 105 or U25 - 26,...
  • Page 30 Circuit EXTERNAL DMA It brings data from an external device (DUOIP:U16) using DMA channel 0. DMA REQUEST (U15 - 137 or U16 - 4) sent from an DUOIP2(U16) to KS32C6400 activates DMA ACKNOWLEDGE (U15 - 138 or U16 - 3) signal and drives DMA channel 0 to produce CHIP SELECT and READ STROBE (/RD) at the external device and bring data from it.
  • Page 31 Circuit DRAM CONTROLLER PARALLEL PORT INTERFACE As KS32C6400 has DRAM controller in it, DRAM This part connected with the computer through the can be connected with external memory. centronics connector makes possible parallel The control mode of DRAM controller enabling interface with the computer.
  • Page 32 Circuit Fig.4-1-4 ECP Hardware Handshaking Timing (forward) Fig.4-1-5 ECP Hardware Handshaking Timing (reverse)
  • Page 33 Circuit INKJET HEAD CONTROLLER This part produces major control signals used to • HGA [13:1] : U15 - 1 ~ 11,159,160, Gate Address, drive INKJET head. It consists of signals to drive Active Low head nozzles, /HGA[13:1], HOE[16:1], /FAULT- • HOE [16:1] : U25 - 13 ~ 29, Head Enable, Active TEST, /M_HEAD-EN, and C_HEAD-EN, and High.
  • Page 34 Circuit Fig.4-1-7 Timing Diagram for Each Nozzle The above control signals are sent to head driver MFP Controller (KS32C6400:U15) supports both DC and the head driver converts these signals to the motor and stepper motors. It controls CR (Carriage level (+12V) to drive head nozzles. Return) motor used to print documents and LF (Line Feed) motor used to feed and eject paper.
  • Page 35 Circuit KS32C6400 Assigned I/O Ports & /Chip_SELECT Pins * /External_Chip_Select : /ECS0 : Pin117 : /MCS : Modem Chip Select. : /ECS1 : Pin118 : /USB_CS : USB Chip Select. : /ECS2 : Pin119 : /IP_CS : DUO_IP2 Chip Select. DESCRIPTION PORT NAME PIN NO...
  • Page 36 Circuit RESET CIRCUIT Primary reset makes flash memory wait in READ As for XK50CX, there are two power resets of mode to fetch program primary reset(/F-POR) and secondary reset(/POR) codes, and secondary reset makes the main and also reset by watchdog timer (/RSTO). Primary...

  • Page 37: System Memory

    Circuit 4-1-3 System Memory SCAN RESOLUTION System memory consists of 1MB flash memory, 8MB DRAM and 2MB DRAM (back-up). Flash – Draft : 300 x 600 (H x V) memory, DRAM are selected by each CHIP – Normal : 600 x 600 (H x V) SELECT (/ROMCS, /RAS0, /RAS 1, /LCAS, /UCAS), –...
  • Page 38 Circuit IMAGE PROCESSING 3) COLOR BINARY IMAGE : 3 X 5K X 275nsec (1) Image signal input: CCD output signals are offset =4.125msec (2 CPM) at 0.7V with about 2V white level. Optimum input 4) MONO BINARY IMAGE : 1 X 5K X 275nsec level of DUOIP2 is 0.7V offset and 2V white =1.375msec (6 CPM) level.
  • Page 39 Circuit DUO_IP2 Assigned I/O Port DESCRIPTION PORT NAME PIN NO SIGNAL NAME GPO0 LEVEL_SH CCD LEVEL SHIFT ON CCD LEVEL SHIFT OFF GPO1 LAMP CCD LAMP ON CCD LAMP OFF GPO2 DIAL PULSE ON DIAL PULSE OFF : IDLE STATE GPO3 RESERVED GPO4...
  • Page 40 Circuit 4-1-5 FAX Transceiver 4-1-5-1. GENERAL This circuit processes transmission signals of modem and between LIU and modem. 4-1-5-2. MODEM (U18) FM336 is a single ship fax modem. It has functions of DTMF detection and DTMF signal production as well as functioins of modem.
  • Page 41 Circuit 4-1-6 USB CONTROLLER 4-1-6-1. CONCEPT • USB SPECIFICATION VERSION 1.1 SUPPORT • FULL SPEED DEVICE : 12MBPS USB Controller is an interface part specifically • 5V I/O PIN INTERFACE (3.3V REGULATOR BULT-IN) designed to support to support a needed protocol to •...
  • Page 42 Main composition is HEAD CONTROL and MOTOR Following is BLOCK DIAGRAM of DRIVER PBA. CONTROL and it is also composed by RESET, S/W USB, PARALLEL INTERFACE. Power is +5V, +11.75V, +30V coming through SMPS Fig.4-2-1 XK50cx DRIVER PBA BLOCK DIAGRAM 4-15...
  • Page 43 Circuit 4-2-1 HEAD CONTROL PART HEAD CONTROLLER GENERAL This part consists of +22V Power Controller to It drives inkjet head to print printing data received control head driver, Fault Test, Head Detection, from the computer or copy an original. It roughly Substrate Heating and ambient Temperature consists of head driver, head Sensor.
  • Page 44 Circuit • +22V Power Controller checks whether the head input receiving the Insert the power cord, then power is supplied to driver output is in a short. Diode cathode is MAIN BOARD through DRIVER PBA CN15. attached to each output transistor collector in the /POR signal which is output through Reset Circut column driver.
  • Page 45 Circuit Color Head 70°C Fig.4-2-3 Temperature around Color Head • HEAD DETECTION CIRCUIT put in HEAD-DATA port of KS32C6400 through Ink cartridge has 8-bit mask ROM I.D. to check the BSF line. With each bit type of cartridge. In order to detect the head, HSM controlled, 8bit I.D data is read and STOP bit is put signal is used as ENABLE signal and BA3 signal out of BA3(LOAD) port.
  • Page 46 Circuit • SURROUNDING TEMPERATURE SENSOR HEAD DRIVING TIMING DS1821(DALLAS SEMI.) is applied to read the temperature around ink cartridge. It is used to get Control signal from MFP controller (Main PBA optimum inking quality by keeping the viscosity of KS32C6400:U15) enters the head driver (Driver ink in the cartridge in the specified level.
  • Page 47 Circuit Fig.4-2-6 TIMING DIAGRAM FOR EACH NOZZLE 4-20...
  • Page 48 Circuit INK CARTRIDGE • PIN ARRAY OF MONO INK CARTRIDGE There are 208 heater chips in mono ink cartridge. Column Address (BA1_ ~ BA13_) Data(BPx) 4-21...
  • Page 49 Circuit • PIN ARRAY OF COLOR INK CARTRIDGE There are 192 heater chips in mono ink cartridge. One cartridge has 64 Cyan, 64 Magenta, 64 Yellow heaters and (64 x 3 colors) 192 nozzles. Column Address (BA1_ ~ BA13_) Data(BPx) 4-22...

  • Page 50: Driving Circuit

    Circuit 4-2-2 MOTOR CONTROL PART GENERAL This part use 1 dc motor and 2 stepper motors, i.e. CR(Cartridge Return) motor and LF(Line Feed) motor, SCAN motor. CR motor moves left and right all-in-one carriage of inkjet head. It helps the printer print accurately on the paper.
  • Page 51 Circuit LF(Line Feed) Motor Driving Circuit ADF Motor Driving Circuits LF motor is driven to feed and eject documents and TX Motor is driver at maximum 1200pps when paper. feeding or ejecting sheets. - Motor Type : stepper motor, bi-polar - Motor Type : stepper motor - Driving Voltage : +30V - Driving Voltage : +30V...

  • Page 52: Ope Pba

    Circuit 4-3 OPE PBA 4-3-1. SUMMARY 4-3-2. OPE PBA consists of U1 (MICON, HT48R50), LCD, OPE Board is separated functionally from the main key matrix, LED indicators. board and operated by the micom (HT48R50) in the Refer to OPE Schematic Diagram and Wiring board.
  • Page 53 Circuit 4-4 LIU PBA 4-4-4. DIALER PART 4-4-1. SUMMARY *MF DIAL LIU WIRE CONNECTS Main B’D’s MODEM AND LINE PARTS, AND IMPEDANCE MATCHING (AC, DTMF Dialing is controlled by MODEM and should be DC), RING DETECTION PART and LINE SEIZURE selected by appropriate LEVEL and On-off Time (DIALER).
  • Page 54 Circuit 4-5 SMPS 4-5-1 Block Diagram of Power Circuit Refer to the following block diagram. 4-5-2 Specifications of Power Circuit INPUT CONDITIONS OUTPUT CONDITIONS Free Voltage ITEM RATED RATED MAXIMUM LOAD 1 Input Rated Voltage AC110–240Vac OUTPUT OUTPUT LOAD CHANGE VOLTAGE CURRENT CURRENT...

  • Page 55: Power Circuit

    Circuit 4-5-3 Power Circuit SWITCHING CIRCUIT (VOLTAGE INPUT STABILIZATION) This product is equipped with a three-wire 12V of 2nd voltage is detected by voltage detector grounding-type power inlet. Insulation is class 1. and feeds back through photo coupler to 1st PWM When a power device part breaks down or some Control Circuit signals compared by error amplifier.
  • Page 56 Circuit +5V OUTPUT TERMINAL +12V OUTPUT TERMINAL Square wave voltage generated by Ns1 produces Square wave voltage generated by Ns3 is rectified DC voltage rectified and smoothed by half-wave and smoothed by half-wave rectifier, and then rectifier. This voltage put in to a three-wire regulator detected by voltage detector.

  • Page 57: Troubleshooting

    5. Troubleshooting 5-1 SCANNER 5-1-1 COPY PROBLEM PROBLEM ITEMS TO BE CHECKED ITEMS TO BE CHECKED HOW TO SOLVE HOW TO SOLVE • Check the scan-cover open. • Room light can transit a thin original. • Check shading profile. • Remake shading profile in the tech mode. White copy •...
  • Page 58 Troubleshooting 5-1-2 PC-Scan PROBLEM ITEMS TO BE CHECKED HOW TO SOLVE • Check the printer cable installed. • Check correct installation, and use standard IEEE1284 cable. • Check how TWAIN driver is installed. • Remove any other scanner driver. • Reboot after reinstallation of the TWAIN driver. Scanning error •...
  • Page 59 Troubleshooting 5-2 Printer 5-2-1 White lines on letters or graphics. • Cause ‘CARTRIDGE MAINT’ will let you know if nozzles If nozzles in print head has a problem, white lines have fallen problems. are marked on the print. • Solution 1) Run print control panel’...
  • Page 60 Troubleshooting 5-2-2 When Vertical lines are printed crookedly • Solution • Cause : Vertical lines are printed crookedly if you do 1) Run print control panel to “align Cartridges”. not “align Vertical lines” on the printer. 2) Select the best one of the above samples and enter the number.

  • Page 61: Paper Feed

    Troubleshooting 5-2-4 Print Error PROBLEM ITEMS TO BE CHECKED HOW TO SOLVE • Check the cartridge empty status. • If there is no cartridge installed, install a cartridge properly. • Make sure that you have installed an authorized cartridge. • Check correct installation, and use standard •...
  • Page 62 Troubleshooting 5-3 FAX 5-3-1 FAX/TELEPHONE Precautions PROBLEM ITEMS TO BE CHECKED HOW TO SOLVE • When you press “ OHD” key: • a) insert it correctly into the connection a) Check line cord connection. jack called “line”. TEL LINE b) Replace defective parts. b) Check MAIN LIU harness, and P1(LIU CANNOT BE PBA).
  • Page 63 Troubleshooting 5-4 Defective Operation PROBLEM ITEMS TO BE CHECKED HOW TO SOLVE • Powered up ? • Check power.(SMPS) a) Check if the cord is properly connected. b) Check each power channel. (+5V, +11.75V, +30V) • Check power harness. • VCC(+5V) M+4.5V? •...

  • Page 64: Service Mode

    Troubleshooting 5-5 Service Mode 5-5-1 How to enter service mode While in service mode, the machine still performs all In service (tech) mode, the technician can check the normal operations. To return to normal user mode, machine and perform various tests to isolate the press MENU, # 1, 9, 3, 4 in sequence again, or turn cause of a malfunction.
  • Page 65 Troubleshooting 5-5-2-2 Options In System Setup MODEM TEST The modem will send various transmit signals on the telephone line you can check the following : • FSK tect • Tones : 1100Hz, 1650Hz, 1850Hz, 2100Hz • G3 training : 14400, 12000, 9600, 7200, 4800, 2400, 21600, 26400, 28800, 31200, 33600 bpi DTMF DTMF (Dual Tone Multiple Frequency) signal can...
  • Page 66 Troubleshooting 5-5-3 Changing System data 5-5-3-1 Selectable System data System data in User Mode Item Default Status PAPER SIZE [LTR/A4/LGL] MESSAGE CONFIRMAT [ON/OFF/ERR] AUTO JO URINAL [ON/OFF] REMOTE RCV CODE [0-9] <*9*> DIAL MODE [TON/PULSE] TONE ECM MODE [ON/OFF] RX REDUCTION [ON/OFF] DISCARD SIZE [ON/OFF/ON(-V]...
  • Page 67 Troubleshooting 5-5-3-2 SYSTEM DATA MODEM SPEED ERROR RATE Default = 33600 bps Default = 5% Select baud rate of 33600, 28800, 14400, 12000, 9600, Error rate of “RTN send” during transmission. 7200, 4800, or 2400 bps. The lower the baud rate, the larger the acceptable error rate.

  • Page 68: Exploded Views And Parts List

    6. Exploded Views and Parts List 6-1 Main Exploded View & Parts List 6-2 MEC Cover Main Exploded View & Parts List 6-3 Scanner Exploded View & Parts List 6-4 Engine Exploded View & Parts List 6-5 MEC-Feeder Exploded View & Parts List 6-6 MEC-Cover Bottom Exploded View &...

  • Page 69: Main Exploded View & Parts List

    Exploded Views and Parts List 6-1 Main Exploded View & Parts List...
  • Page 70 Exploded Views and Parts List - Main Parts List DESCRIPTION SEC. CODE Q’TY ELA•UNIT-ADF SCANNER JB96-01220A MEC-COVER MAIN JB75-00273B MEC-CONT PNL ASS’Y JB75-00306A SCANNER SUPPORTER MEC-COVER BOTTOM JB75-00275A ELA UNIT-ENGINE ASS’Y MEC-FEEDER(SEC) JB75-00308A PMO-GUIDE EXTENSION JB72-00304A PMO-COVER REAR JB72-00755B PRINT HEAD INK-COLOR JB47-00014A PRINT HEAD INK-MONO JB47-00015A...
  • Page 71 Exploded Views and Parts List 6-2 MEC-Cover Main Exploded View & Parts List...
  • Page 72 Exploded Views and Parts List - MEC Cover Main Parts List DESCRIPTION SEC. CODE Q’TY PMO-COVER MAIN JB72-00756A SUPPORT SCANNER COVER PCB E-RING SHAFT SPRING (A) PIN SPRING (B) PIN SCREW (M3X10) 6003-000196...

  • Page 73: Scanner Exploded View & Parts List

    Exploded Views and Parts List 6-3 Scanner Exploded View & Parts List...
  • Page 74 Exploded Views and Parts List - Scanner Parts List DESCRIPTION SEC. CODE Q’TY ELA UNIT-ADF/SCANNER(CC2-F) JB96-01220A MEC-COVER PLATEN ASS’Y JB75-00302A HINGE-PLATEN JB61-00062A PMO-COVER PLATEN JB72-00829A MPR-SHEET W/ SPONGE JB74-00036A SCREW-TAPPING 6002-000175 PMO-TX STACKER JB72-00830A PMO-TX COVER JB72-00847A PMO-GUIDE DOC(L) JC72-41335A PMO-GUIDE DOC(R) JC72-41336A IPR-WASHER SPRING CU...
  • Page 75 Exploded Views and Parts List - Scanner Parts List DESCRIPTION SEC. CODE Q’TY PMO-ADF LOWER JB72-00827A MEC-ROLLER WHITE ASS’Y JB75-00296A MEC-ROLLER EXIT ASS’Y JB75-00291A GEAR-CLUTCH 29 JB66-00101A PMO-WHITE CLUTCH SUB 29 JB72-00844A GEAR-CLUTCH IDLE 29 JB66-00100A PMO-ARM(SWING GEAR1X12) JB72-00493A IPR-WASHER WAVE JB70-00070A GEAR-IDLE SWING12(0.8) JB66-00053A...
  • Page 76 Exploded Views and Parts List - Scanner Parts List DESCRIPTION SEC. CODE Q’TY RING-E 6044-000125 PMO-HOLDER BELT JB72-00764A PMO-PULLEY JB72-00763A PMO-COVER SCAN LOWER JB72-00760A PMO-TIE STOPPER JG72-40717A SCREW-TAPPING 6002-000175 PMO-HOLDER CCD JB72-00759A MEA UNIT-MOTOR BRACKET JB97-01450A RING-E 6044-000125 PMO-HOLDER BELT JB72-00764A GEAR-TIMING JB66-00082A...

  • Page 77: Engine Exploded View & Parts List

    Exploded Views and Parts List 6-4 Engine Exploded View & Parts List 6-10...
  • Page 78 Exploded Views and Parts List - Engine Parts List DESCRIPTION SEC. CODE Q’TY IPR-FRAME MAIN JB70-00058A MOTOR-DC CARRIAGE JB31-00005A SPRING-SHAFT CR JB61-70913A SCREW-MACHINE 6001-000485 VEARING-FEEDR JB66-10002A ICT-SHAFT CR JB70-40906A PPR-ENCODER STRIP(V) JB72-00662A SPRING-PS ENCODER JB61-70917A PULLY IDLE ASS’Y JB75-11110A PMO-STOPPER PULLEY JB72-41212A SPRING-CS PULLEY JB61-70914A...
  • Page 79 Exploded Views and Parts List DESCRIPTION SEC. CODE Q’TY 17-1 PMO-FRAME CARRIER JB72-41328A 17-2 PCB-FPC JB41-10531A 17-3 PMO-HOLDER FPC JB72-40289A 17-4 PMO-KEY HEAD COLOR “AC” JB72-00195A 17-5 PMO-KEY HEAD G JB72-41110A 17-6 PBA MAIN-ENCODER PBA JB92-01088A 17-7 SCREW-TAPPING 6002-001065 17-8 PMO-CRADDLE HEAD JB72-40282A 17-9...

  • Page 80: Mec-Feeder Exploded View & Parts List

    Exploded Views and Parts List 6-5 MEC-Feeder Exploded View & Parts List 6-13...
  • Page 81 Exploded Views and Parts List - MEC-Feeder Parts List DESCRIPTION SEC. CODE Q’TY PMO-CAP LEFT EDGE JB72-00269A PMO-GUIDE SIDE PAPER JB72-00303A PMO-FRAME ASF JB72-00301A PMO-SHAFT PICKUP JB72-41331B GEAR-IDLER ASF JB72-40927A GEAR-DRIVER ASF JB66-40928A PMO-HOUSING R JB72-40982A PMO-MOUSING L JB72-40985A GEAR-drive PICKUP JB66-40907A GEAR-PICKUP IDLER JB66-40906A...

  • Page 82: Mec-Cover Bottom Exploded View & Parts List

    Exploded Views and Parts List 6-6 MEC-Cover Bottom Exploded View & Parts List 6-15...
  • Page 83 Exploded Views and Parts List - MEC-Cover Bottom Parts List DESCRIPTION SEC. CODE Q’TY PMO-COVER BOTTOM JB72-00757A RX STACKER JB75-00117A PMO-STACKER R¥1 JB72-00286A PMO-STACKER R¥2 JB72-00287A MPR-FELT LOWER JB74-00015A MPR-FELT UPPER JB74-00014A ELA PWR-SMPS JB96-01176A PMO-HOLDER HARNESS JB72-00765A PBA SUB-MAIN PBA JB92-01118A PBA LIU JB92-01142A...
  • Page 84 Exploded Views and Parts List 6-7 Control Panel Ass’y Exploded View & Parts List 6-17...
  • Page 85 Exploded Views and Parts List - Control Panel Ass’y Parts List DESCRIPTION SEC. CODE Q’TY PMO-COVER FRONT JB72-00831A PPR-OVER LAY JB72-00850A PMO-OPE PANEL JB72-00832A SCREW, M3XL8 6002-000175 PMO-KEY FUNCTION(A) JC72-00454A PMO-KEY SCROLL JC72-00453A PMO-KEY FUNCTION(B) JC72-00455A PMO-KEY TEL JC72-00452A PMO-KEY START JC72-00450A PMO-KEY STOP JC72-00451A...

  • Page 86: Packing & Parts List

    Exploded Views and Parts List 6-8 Packing & Parts List 6-19...
  • Page 87 Exploded Views and Parts List - Packing Parts List DESCRIPTION SEC. CODE Q’TY BAG-PE SET JK69-30101A CUSHION-L JB69-00118A CUSHION-R JB69-00118A BOX(P)-MAIN JB69-00117A BAG-PE(ACCESSORY) JC69-00031C MAN(BOOK)-QRG MAN(CARD)-WARRANTY MAN(CARD)-QRC S/W-UTILITY CD-ROM1,2 PRINT HEAD INK-COLOR JB47-00014A PRINT HEAD INK-MONO JB47-00015A CBF-INTERFACE-USB JC39-00001A POWER CORD-SF-4705 JB39-00001A 6-20...

  • Page 88: Block Diagrams

    8. Block Diagrams 8-1 System Interconnection Diagram...
  • Page 89 7. Electrical Parts List 7-1 Main PBA Sec Code Description Spec Location No Q’ty JB92-01141A PBA SUB-MAIN “SCX-1110F,XEROX,USA,MAIN,FAX,-,-,-,-” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0404-000112 DIODE-SCHOTTKY “RB420D,25V,100mA,SOT-23,TP” 0404-000112 DIODE-SCHOTTKY “RB420D,25V,100mA,SOT-23,TP” 0501-000279 TR-SMALL SIGNAL “KSA1182-Y,PNP,150mW,SOT-23,TP,” 0501-000338 TR-SMALL SIGNAL “2SC2812,NPN,200mW,SOT-23,TP,20”...
  • Page 90 Electrical Parts List Sec Code Sec Code Description Description Spec Spec Location No Q’ty Location No Q’ty 2007-000033 R-CHIP “0OHM,5%,1/8W,DA,TP,3216” R236 2007-000070 R-CHIP “0ohm,5%,1/16W,DA,TP,1608” R118 2007-000070 R-CHIP “0ohm,5%,1/16W,DA,TP,1608” R123 2007-000070 R-CHIP “0ohm,5%,1/16W,DA,TP,1608” R156 2007-000070 R-CHIP “0ohm,5%,1/16W,DA,TP,1608” R173 2007-000070 R-CHIP “0ohm,5%,1/16W,DA,TP,1608” R180 2007-000070 R-CHIP...
  • Page 91 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R121 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R124 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R145 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R146 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R147 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R148 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608” R150 2007-000078 R-CHIP “1Kohm,5%,1/16W,DA,TP,1608”...
  • Page 92 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R166 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R186 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R191 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R193 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R198 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R213 2007-000090 R-CHIP “10Kohm,5%,1/16W,DA,TP,1608” R214 2007-000090 R-CHIP...
  • Page 93 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000290 R-CHIP “100OHM,5%,1/10W,DA,TP,2012” R152 2007-000300 R-CHIP “10KOHM,5%,1/10W,DA,TP,2012” R101 2007-000300 R-CHIP “10KOHM,5%,1/10W,DA,TP,2012” R119 2007-000305 R-CHIP “10Mohm,5%,1/16W,DA,TP,1608” R132 2007-000368 R-CHIP “130Kohm,5%,1/16W,DA,TP,1608” 2007-000468 R-CHIP “1KOHM,5%,1/10W,DA,TP,2012” 2007-000468 R-CHIP “1KOHM,5%,1/10W,DA,TP,2012” 2007-000468 R-CHIP “1KOHM,5%,1/10W,DA,TP,2012” 2007-000539 R-CHIP “200ohm,5%,1/16W,DA,TP,1608”...
  • Page 94 Electrical Parts List Sec Code Description Spec Location No Q’ty 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C125 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C126 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C129 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C131 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C133 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C134 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” C136 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,”...
  • Page 95 Electrical Parts List Sec Code Description Spec Location No Q’ty 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP” “100nF,+80-20%,25V,Y5V,TP,1608,” 2203-000189 “C-CERAMIC,CHIP”...
  • Page 96 Electrical Parts List Sec Code Description Spec Location No Q’ty 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” C122 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” C215 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP” “1nF,10%,50V,X7R,TP,1608,-” 2203-000440 “C-CERAMIC,CHIP”...
  • Page 97 Electrical Parts List Sec Code Description Spec Location No Q’ty 2401-000042 C-AL “100uF,20%,16V,GP,TP,6.3x7,5” C182 2401-000042 C-AL “100uF,20%,16V,GP,TP,6.3x7,5” 2401-000131 C-AL “1000uF,20%,16V,GP,TP,10x20,5” 2401-002594 C-AL “220uF,20%,16V,GP,TP,8x11.5,5” 2402-000176 “C-AL,SMD” “10uF,20%,16V,GP,TP,4.3x4.3x5.4” C106 2402-000176 “C-AL,SMD” “10uF,20%,16V,GP,TP,4.3x4.3x5.4” C152 2402-000176 “C-AL,SMD” “10uF,20%,16V,GP,TP,4.3x4.3x5.4” C199 2402-000176 “C-AL,SMD” “10uF,20%,16V,GP,TP,4.3x4.3x5.4” 2404-000284 “C-TA,CHIP” “10uF,20%,16V,-,TP,3528,-”...
  • Page 98 Electrical Parts List 7-2 Driver PBA Sec Code Description Spec Location No Q’ty JB92-01143A PBA SUB-DRIVER “SCX-1110F,XEROX,USA,DRIVER,FAX,-,-,-,-” 0401-001003 DIODE-SWITCHING “MMBD6050LT1,70V,200mA,225mW,4n” 0401-001003 DIODE-SWITCHING “MMBD6050LT1,70V,200mA,225mW,4n” 0401-001003 DIODE-SWITCHING “MMBD6050LT1,70V,200mA,225mW,4n” 0402-000199 DIODE-RECTIFIER “EGL41B,100V,1A,DO-213AB,TP” 0403-000283 DIODE-ZENER “MMBZ5234B,6.2V,5%,225mW,SOT-23” 0403-000287 DIODE-ZENER “MMBZ5251B,22V,5%,225mW,SOT-23,” 0407-000101 DIODE-ARRAY “DA204K,20V,100mA,C2-3,SOT-23,T” 0501-000338 TR-SMALL SIGNAL “2SC2812,NPN,200mW,SOT-23,TP,20”...
  • Page 99 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000029 R-CHIP “0OHM,5%,1/10W,DA,TP,2012” R148 2007-000029 R-CHIP “0OHM,5%,1/10W,DA,TP,2012” R149 2007-000029 R-CHIP “0OHM,5%,1/10W,DA,TP,2012” R150 2007-000029 R-CHIP “0OHM,5%,1/10W,DA,TP,2012” 2007-000029 R-CHIP “0OHM,5%,1/10W,DA,TP,2012” 2007-000029 R-CHIP “0OHM,5%,1/10W,DA,TP,2012” 2007-000033 R-CHIP “0OHM,5%,1/8W,DA,TP,3216” R126 2007-000033 R-CHIP “0OHM,5%,1/8W,DA,TP,3216” 2007-000033 R-CHIP “0OHM,5%,1/8W,DA,TP,3216”...
  • Page 100 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000109 R-CHIP “1Mohm,5%,1/16W,DA,TP,1608” 2007-000109 R-CHIP “1Mohm,5%,1/16W,DA,TP,1608” 2007-000123 R-CHIP “1.5Kohm,5%,1/16W,DA,TP,1608” 2007-000223 R-CHIP “1.2KOHM,5%,1/8W,DA,TP,3216” 2007-000223 R-CHIP “1.2KOHM,5%,1/8W,DA,TP,3216” 2007-000245 R-CHIP “1.5KOHM,5%,1/8W,DA,TP,3216” R101 2007-000245 R-CHIP “1.5KOHM,5%,1/8W,DA,TP,3216” 2007-000282 R-CHIP “100KOHM,5%,1/10W,DA,TP,2012” 2007-000290 R-CHIP “100OHM,5%,1/10W,DA,TP,2012” R124 2007-000297 R-CHIP “10KOHM,1%,1/10W,DA,TP,2012”...
  • Page 101 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000965 R-CHIP “5.1Kohm,5%,1/16W,DA,TP,1608” 2007-000967 R-CHIP “5.1KOHM,5%,1/8W,DA,TP,3216” R116 2007-000998 R-CHIP “510OHM,1%,1/10W,DA,TP,2012” 2007-001002 R-CHIP “510ohm,5%,1/16W,DA,TP,1608” 2007-001041 R-CHIP “56KOHM,5%,1/8W,DA,TP,3216” R117 2007-001041 R-CHIP “56KOHM,5%,1/8W,DA,TP,3216” 2007-001041 R-CHIP “56KOHM,5%,1/8W,DA,TP,3216” R121 2007-001041 R-CHIP “56KOHM,5%,1/8W,DA,TP,3216” 2007-001041 R-CHIP “56KOHM,5%,1/8W,DA,TP,3216” 2007-001041 R-CHIP “56KOHM,5%,1/8W,DA,TP,3216”...
  • Page 102 Electrical Parts List Sec Code Description Spec Location No Q’ty 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP” “100nF,+80-20%,50V,Y5V,TP,2012,” 2203-000192 “C-CERAMIC,CHIP”...
  • Page 103 Electrical Parts List Sec Code Description Spec Location No Q’ty 3301-000362 CORE-FERRITE BEAD “AB,60ohm,3.2x2.5x1.3mm,1500mA,TP,-,0.05ohm” 3301-000362 CORE-FERRITE BEAD “AB,60ohm,3.2x2.5x1.3mm,1500mA,TP,-,0.05ohm” 3301-000362 CORE-FERRITE BEAD “AB,60ohm,3.2x2.5x1.3mm,1500mA,TP,-,0.05ohm” 3301-000362 CORE-FERRITE BEAD “AB,60ohm,3.2x2.5x1.3mm,1500mA,TP,-,0.05ohm” 3301-000362 CORE-FERRITE BEAD “AB,60ohm,3.2x2.5x1.3mm,1500mA,TP,-,0.05ohm” 3702-001133 CONNECTOR-RIBBON “36P,FEMALE,STRAIGHT,AUF” CN12 3708-001058 CONNECTOR-FPC/FC/PIC “30P,1.0MM,STRAIGHT,SN” CN10 3708-001058 CONNECTOR-FPC/FC/PIC “30P,1.0MM,STRAIGHT,SN”...
  • Page 104 Electrical Parts List 7-3 OPE PBA Sec Code Description Spec Location No Q’ty JB92-01133A PBA SUB-OPE “SCX-1110F,XEROX,USA,OPE,FAX,-,-,-,-” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0401-000116 DIODE-SWITCHING “MMSD914T1,100V,200mA,225mW,4nS” 0501-000279 TR-SMALL SIGNAL “KSA1182-Y,PNP,150mW,SOT-23,TP,” 0501-000279 TR-SMALL SIGNAL “KSA1182-Y,PNP,150mW,SOT-23,TP,” 0501-000279 TR-SMALL SIGNAL “KSA1182-Y,PNP,150mW,SOT-23,TP,”...
  • Page 105 Electrical Parts List Sec Code Description Spec Location No Q’ty 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000542 R-CHIP “200OHM,5%,1/8W,DA,TP,3216” 2007-000589 R-CHIP “22KOHM,5%,1/8W,DA,TP,3216” 2007-000589 R-CHIP “22KOHM,5%,1/8W,DA,TP,3216” 2007-000589 R-CHIP “22KOHM,5%,1/8W,DA,TP,3216” 2007-000589 R-CHIP “22KOHM,5%,1/8W,DA,TP,3216”...
  • Page 106 Electrical Parts List 7-4 LIU PBA Sec Code Description Spec Location No Q’ty JB92-01142A PBA SUB-LIU “SCX-1110F,XEROX,USA,LIU,FAX,-,-,-,-” 0401-000005 DIODE-SWITCHING “1N4148,100V,200MA,DO-35,TP” 0401-000148 DIODE-SWITCHING “1N914,100V,500mA,DO-35,TP” 0401-000148 DIODE-SWITCHING “1N914,100V,500mA,DO-35,TP” 0401-000148 DIODE-SWITCHING “1N914,100V,500mA,DO-35,TP” 0401-000148 DIODE-SWITCHING “1N914,100V,500mA,DO-35,TP” 0401-000148 DIODE-SWITCHING “1N914,100V,500mA,DO-35,TP” 0401-000148 DIODE-SWITCHING “1N914,100V,500mA,DO-35,TP” 0402-000339 DIODE-BRIDGE “W06G,600V,1.5A,-,BK”...
  • Page 107 Electrical Parts List Sec Code Description Spec Location No Q’ty 3711-002815 CONNECTOR-HEADER “BOX,14P,1R,2mm,STRAIGHT,SN” 4715-000119 SURGE ABSORBER “400V,15%,500A,-,” ARS2 4715-000131 SURGE ABSORBER “600V,15%,500A,-,” ARS1 4715-000131 SURGE ABSORBER “600V,15%,500A,-,” ARS3 JB26-00001A TRANS-MATCHING-REMOTE “SF-3100,-,30KOHM:30KOHM” JB41-00054A PCB-LIU “SCX-1110F,PANOL,1L,-,0.8T,100*90,-,-,-,-” PCB-LIU JB70-00161A IPR-TERMINAL “SCX-1110F,SPTE,12.8,0.5T,SILVER,-,GND” LUG1 JC39-40511A CBF HARNESS- “ML-80,JUMPER,AWG22,52mm,SILVER”...

  • Page 108: Schematic Diagrams

    9. Schematic Diagrams 9-1 Main Board Connection Diagram - This Document can not be used without Samsung's authorization -...
  • Page 109 http://getMANUAL.com Schematic Diagrams 9-2 Driver Board Diagram - This Document can not be used without Samsung's authorization -...

Table of Contents