Assigning The Screen After Auto Clear; Customizing The Button Layout On The Home Screen - Xerox Versant 80 Press System Administration Manual

8. Select the desired setting for the default home screen.
The default setting is Services Home.
9. Select Save.
The previous screen displays.
10. Select Close.
The main Tools screen displays.
11. Exit the administrator mode.

Assigning the Screen After Auto Clear

Use this procedure to assign which screen will be displayed after the Auto Clear button
is pressed.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Screen / Button Settings.
6. Select Screen After Auto Clear from the displayed list.
7. Select Change Settings.
8. Select either Last Selection Screen or Services Home.
The default setting is Services Home.
9. Select Save.
The previous screen displays.
10. Select Close.
The main Tools screen displays.
11. Exit the administrator mode.

Customizing the Button Layout on the Home Screen

1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Screen / Button Settings.
6. Select Services Home from the displayed list.
7. Select Change Settings.
8. From the displayed list, select the position where you want to assign a service.
The layout of the buttons on this screen correspond with the layout of the buttons
on the Home screen.
9. From the Main Feature Selection screen, select a service you want to display on the
Home screen.
10. Select Save.
Xerox ® Versant ® 80 Press
System Administration Guide
System Administrator Overview
1-3