Table of Contents
Advertisement
Power On / Off
Switch on the power before operating the machine.
The machine is ready for operation within 150 seconds after the power is switched on.
It may take longer due to the image quality adjustment according to the machine
condition.
Turn the machine off at the end of the day or when it is not in use for a long period of
time. Also, use [Power Saving] feature when not in use for a while to reduce the power
consumption.
Important • Switching off the power of the machine may cause loss of data being processed.
For information about the power saving feature, refer to "Power Saver mode" in Chapter 2 of the User
Guide.
Powering On
The procedure for turning on the power is as follows.
1
Open the cover and press the
power switch to the [ | ] position to
turn the power on.
Note
Powering Off
The procedure for turning the power off is as follows.
Important • Switching off the power of the machine during data processing stored in the memory may
1
Before turning the power off, make sure that all copy or print jobs have completely
finished. Also, make sure that the Online indicator is not lit.
Important • Never turn the power off in the following instances:
2
Press the power switch to the [ ] position.
Important • Power off processing is performed internally on the machine for a while after the power
Note
• The "Please wait..." message
indicates that the machine is
warming up. The machine
cannot be used while it is
warming up.
cause loss of data being processed.
• While data is being received
• While jobs are being printed
• While jobs are being copied
• While a scan is being executed
switch is turned off. Therefore, do not unplug the power cord from the power outlet
immediately after turning the power switch off.
• Before you turn the power back on after turning it off, first make sure that the touch screen
has gone out.
Power On / Off
2
21
Advertisement
Table of Contents
