Advertisement
HOW TO VERIFY
You can select the Verify (V) mode from the Index (X) or
Update (U) modes.
1.
· Load the programs. (See
How
to
Load a Program.)
2.
Insert the diskette to be verified (displays the sector 08
data set label).
3.
Press SEL PROG.
4.
Key in a 1, 2, 3, 4, 5, 6, 7, 8, 9, or A (storage area where
the program is stored).
5.
Press FUNCT SEL lower and VERIFY. (The first record
of the data set is displayed.)
6.
Key in the data from the source document.
After pressing the first key, the rest of the record disappears
from the screen. From this point on, data is displayed up to
the current cursor position.
74
What To Do When Interrupted While Verifying
1.
Write down the address of the next record to be verified
(see the address on the status line).
2.
Press FUNCT SEL lower and RETURN TO INDEX.
3.
Remove the diskette.
To Continue an Interrupted Job:
1.
Load the programs. (See
How to Load a Program.)
2.
Insert the diskette.
3.
Search for the address of the next record to be verified.
To do this:
a. Press FUNCT SEL lower and SEARCH ADDRESS.
b. Key in the record address.
c. Press REC ADV.
4.
Press SEL PROG.
5.
Key in a 1, 2, 3, 4, 5, 6, 7, 8, 9, or A (program storage
area where the program is stored).
6.
Select Verify (V) mode.
7.
Continue verifying.
Advertisement
