Advertisement
Code
Type
P2
Printer error
P3
Printer error
Cause
Print error during forms movement.
(See note under P4 error code.)
Print error during dump. (See
note under P4 error code.)
What You Do
If a printer error occurs, first check for the obvious problems,
such as an open cover or no forms. You must then choose one
of the following responses:
•
Reposition the forms and then press NUM SHIFT and
RESET to continue.
Note:
If a P2 or P3 error occurs and you select to bypass the
print instruction, manually check vertical forms alignment to
ensure that it is correct for the next print instruction.
• Press ALPHA SHI FT and RESET to bypass any remaining
printing.
•
Press ALPHA SHIFT and NUM SHIFT with RESET to
terminate the job and return to Index (X) mode.
Note:
EOD is not updated. Follow your local procedures
for a power outage to update the EOD and continue with
the job.
191
Advertisement
