Advertisement
How to Insert Continuous Forms (continued)
Tractor Cover and Pins
Paper-Advance Knob
Tractor Cover and Pins
114
8.
Turn the paper-advance knob to move the paper around
the platen until you can grasp it with your fingers.
9.
If the form guide rack is in a vertical position, replace
it in the horizontal position.
10.
Open both tractor covers.
11.
Pull the paper release lever forward.
12.
Pull the paper up and place the left margin holes over
the tractor pins.
13.
Close the left tractor cover.
14.
Squeeze the two knobs on the right tractor and slide the
tractor to align the pins with the right margin holes.
15.
Place the right margin holes over the tractor pins.
16.
Close the right tractor cover.
Advertisement
