Advertisement
Error Recovery Procedures (continued)
Code Type
C1
Drive ready
C2
Cause
This error was caused when switching
between drives and the drive switched
to was not ready.
What You Do
The following options are available:
•
Remove the diskette in drive 1, insert
another diskette, and press RESET to
continue processing on drive 1.
•
If the 3741 was writing, press FUNCT
SEL upper and T while the error is
posted, which will cause the 3741 to
issue an EOJ (transmit the XZ record
if in mode 4) to the system and go
offline, returning to the index track
and reinitiating the format buffers
with Ns.
•
Hold both ALPHA SHIFT and NUM
SHIFT while pressing RESET to
terminate the operation and take the
3741 offline.
157
Advertisement
