Advertisement
C.
Press FUNCT SEL lower and SEARCH CON-
TENT.
D.
Press FIELD COR. (This causes the card con-
taining the search criteria to be read.)
5.
Switch AUTO REC ADV to ON (for continuous
punching).
6.
Press FUNCT SEL upper and PUNCH TO EOD (this
starts punching operation).
When completed, the 3741 returns to the Index (X) mode
and displays the data set label.
From the Update (U) Mode
1.
Switch AUTO REC ADV to OFF.
2.
Load the card read/punch programs.
3.
Press REC ADV until the record where
punching rec-
ords under search content
is to start appears on the
display screen or do a search operation (see
Search).
Then press REC BKSP.
4.
146
Key search criteria or read the search criteria from a card.
If search criteria is to be keyed, do the following:
A.
Press FUNCT SEL lower and SEARCH CON-
TENT.
B.
Advance to the position the data is entered on
the record (position 20 in this example); then key
in the search criteria in the same position it
appears in the records.
If search criteria is to be read from a card, do the fol-
lowing:
·
A.
Place the card containing the search criteria so
that it is the first card in the hopper.
B.
Press FUNCT SEL lower and V. (This places
the 3741 in, read a card mode.)
C.
Press FUNCT SEL lower and SEARCH CON-
TENT.
D.
Press FIELD COR. (This causes the card con-
taining the search criteria to be read.)
Advertisement
