Code
Type
A2
(cont.)
Mode
Cause
P (cont.)
What You Do
3. Is the 3741 AUTO REC ADV switch on?
Yes
No
Is the record that
caused the jam being
displayed?
Go to step 4.
Yes
No
Go to step 4.
Press DUP key
until a card is
punched and
check to see if
the card is
punched cor-
rectly. If it is
not, repeat this
procedure.
4. Switch CLEAR on and off.
5. Remove two btank cards from the data
recorder stacker.
6. Switch SPL FEAT to ON.
7. Press FEED until two cards are fed
into the read/punch station.
8. Press VER RES.
9. Press RESET (on the 3741) to continue.
217