Advertisement
How to Display the Production Statistics
Before production statistics can be displayed you must be in
X R mode. (Press FUNCT SEL lower and RETURN TO INDEX
if not in X R mode.) To display production statistics press
FUNCT SEL lower and DISPLAY PROD STAT.
Record
Counter
Keystroke
Counter
After Displaying the Statistics
Verify Correction
Keystroke
Counter
Press RESET to display the data set label again.
OR
Press R to display the data set label and reset the counters
to zero.
How to Record the Production Statistics on a Disk
Normally production statistics are recorded onto a separate
disk.
1.
Insert the diskette for production statistics.
2.
Select the Enter mode by either:
a. pressing FUNCT SEL lower and ENTER (for a new
data set)
OR
b. press FUNCT SEL lower, SEARCH EOD; then press
REC ADV after the search stops (to add to a data set).
3.
Press FUNCT SEL lower and DISPLAY PROD STAT.
(The cursor is at position 22; you can add data from
here to the end of the record.)
4.
Press REC ADV (records the statistics onto the disk).
5.
Press FUNCT SEL lower and RETURN TO INDEX.
Note:
In Enter mode, you can't reset the counters. To reset
them, return to the index track, display the production statis-
tics, and press R.
97
Advertisement
