Advertisement
5.
Switch AUTO REC ADV to ON (for continuous
punching).
6.
Press FUNCT SEL upper and PUNCH TO EOD (this
starts punching operation).
When completed, the 3741 returns to the Index (X) mode
and displays the data set label.
How to Punch a Record from Disk 2
1.
Load the card read/punch programs if necessary.
2.
Display the record on the second disk that you want
to punch.
3.
4.
Note: If you are not currently doing disk 2 opera-
tions, you will have to do a disk 2 search to display
the record. In this case, see Searching Disk 2.
Press FUNCT SEL lower and N.
Press FIELD COR to punch that record.
How to Punch a Program That is in a Storage Area
1.
Press FUNCT SEL lower and N.
2.
Press SE L PROG and key in the program number ( 1
through 8).
3.
Press FUNCT SEL lower, hold down NUM SHIFT and
press DISPLAY PROG.
4.
Press SEL PROG and key in the program number of
the program level to be used for punching.
5.
Press FIELD COR. (This punches the program being
displayed.)
After the 3741 punches the program, press REC ADV and
REC BKSP to restore the data display.
How to Cancel a Punch Operation
To cancel a punch operation, press ALPHA SHIFT and
NUM SHIFT with RESET.
147
Advertisement
